Blade Dispenser for Bed Scraper
Print Profile(11)
![[6x3mm Magnet Holes]: .2mm layer, 2 walls, 15% infill](https://makerworld.bblmw.com/makerworld/model/USac532453600c1f/444046178/instance/2024-03-22_34ee8d4ab428.jpg?x-oss-process=image%2Fresize%2Cw_100%2Fformat%2Cwebp)
Description
This is a useful Blade Dispenser for my new Optimized Bed Scraper with replaceable blades.
The dispenser holds 45 blades and has a hook to which the bed scraper can be attached. Double-sided adhesive tape can be used to attach the dispenser to the printer. Alternatively, 2 round magnets measuring 15x2mm can be glued in. A drill hole was also provided for hanging on a nail.
Print Instructions:
The dispenser box requires support in 2 places, as shown in the picture above. It is recommended to use the "Paint support" function for this.
How to use:
To fill the box with blades I designed a suitable bar (see picture above). The blades are pushed onto these. The thickened end of the rod must be at the bottom, as must the cutting edge of the individual blades. Then the rod with the blades is inserted into the dispenser box from above and pulled out from the bottom. Now please put the lid on. Individual blades can then simply be pulled out from the bottom of the box.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (233)