MODRA Modular System Panels (L / M / S)

MODRA Modular Wall Panels is the core of the MODRA Modular System

Strong snap-lock interface.

Print one plate or combine multiple panels to build your own layout.
 

Features:
• Integrated snap-lock system
• Clean front surface
• 4 mounting holes (optional use)
• Designed for direct wall mounting
• Compatible with all MODRA accessories https://makerworld.com/collections/21408482

Accessories slide in with a light click and stay securely in place.
They can be removed by lifting upward with moderate force.

Versions available:

MODRA Panel L – 237×237 mm (5×5 locks)

• Size: 237 × 237 mm
• Weight: ~100 g
• PLA 19%

• PETG 15%

• Flow ratio 0,98

• No support

• Sparse infill pattern: Rectilinear

MODRA Panel L Reinforced — 237×237 mm (5×5 locks)

• Size: 237 × 237 mm
• Weight: ~150 g
• PLA 30%

• PETG 35%

• Flow ratio 0,98

• No support

• Sparse infill pattern: Rectilinear

MODRA Panel M – 190×190 mm (4×4 locks)

• Size: 190 × 190 mm
• Weight: ~67 g 
• PLA 19%

• PETG 15%

• Flow ratio 0,98

• No support

• Sparse infill pattern: Rectilinear

MODRA Panel M Reinforced — 190×190 mm (5×5 locks)

• Size: 190 × 190 mm
• Weight: ~100 g
• PLA 30%

• PETG 35%

• Flow ratio 0,98

• No support

• Sparse infill pattern: Rectilinear
 

MODRA Panel S – 143×143 mm (3×3 locks)

• Size: 143 × 143 mm
• Weight: ~40 g 
• PLA 19%

• PETG 15%

• Flow ratio 0,98

• No support
• Sparse infill pattern: Rectilinear

MODRA Panel S Reinforced — 143×143 mm (3×3 locks)

• Size: 143 × 143 mm
• Weight: ~55 g
• PLA 30%

• PETG 35%

• Flow ratio 0,98

• No support

• Sparse infill pattern: Rectilinear

⸻

All versions maintain identical external dimensions and full compatibility with all MODRA accessories.

Choose the version depending on your load requirements.

MODRA Segments
Additional segments are available to expand your layout or build walls without full panels.
Fully compatible with all MODRA Panels.
https://makerworld.com/uk/models/2718974-modra-modular-wall-segments#profileId-3011700

Mounting guide 

1. Start position
The first panel must always be installed in the bottom-left corner.
This panel becomes the reference for the entire layout.

2. Expansion direction
Build the system to the right and upward from the first panel.

3. Panel connection principle
Each new panel mechanically locks into the previous one, which additionally presses the installed panel against the wall.

4. Screws requirement
Because of this interlocking design, installation is typically possible with two screws per panel.

5. Fasteners selection
The exact fastener type and quantity depends on:
• wall material
• accessory weight
• overall system load

6. Recommendation
Use appropriate wall anchors when mounting on drywall, brick, or concrete to ensure safe load capacity.