IKEA Skadis modular pegboard 2.0 - Free 3D Print Model

Search models, users, collections, and posts

AdamKozakGrafika

Tools>Organizers

IP Report

Print Profile(4)

All

P2S

H2D

A1 mini

X1 Carbon

P1P

H2D Pro

P1S

X1E

H2C

H2S

X2D

A2L

[PETG] 0.2mm layer, 2 walls, 15% infill

Designer

32.7 h

25 plates

5.0(22)

[PLA] 0.2mm layer, 2 walls, 15% infill

Designer

32.6 h

25 plates

4.9(19)

FAST MODE! [PETG] 0.24mm layer, 2 walls, 13% infill

Designer

27.9 h

25 plates

5.0(3)

FAST MODE! [PLA] 0.24mm layer, 2 walls, 13% infill

Designer

27.6 h

25 plates

5.0(2)

Open in Bambu Studio

Boost

944

3925

2.3 k

483

Released

Bill of Materials

Bambu Filaments

Select all

White (33100) / Filament with spool / 1 kg

PETG HF

Jade White (10100) / Filament with spool / 1kg

PLA Basic

Description

Check out the brand New IKEA Skadis modular pegboard 3.0!

And also 2.0, 2.0.1 and 2.0.2!

and my IKEA Skadis small boards 2.0!

and also IKEA Skadis shelf system 2.0!

Membership

Want to print and sell my models commercially? Get the Commercial License Membership!

Join

Boost Me (for free)

If this model worked well for you, consider using a Boost - it helps me to make more and better things!

New and improved design!

Now with larger module connectors and screw holes for mounting - wall distances and plugs for unused screw holes included!

Check out the new “FAST MODE!” print profiles! Same strength - less time (also compatible with ludicrous printing mode for even faster prints!)

Build your own Skadis board — a small one for your desk or a full wall one for your garage or workshop! The only limit is your imagination (or the amount of the filament you own)!

The board consists of base modules connected via connectors.

There are "A" and "B" modules, which have to be connected in a checkerboard-like pattern.

One base module is 14 x 14 cm, , the border modules have their size increased by 1cm for each side with the border.

No supports required, zero waste printing, easy assembly, no tools or other accessories required.

More of my Skadis compatible boards and accessories:

IKEA Skadis

Some recommended Skadis accesories:

Skadis modular pegboard

Skadis modular pegboard 2.0

IKEA Skadis modular pegboard 2.0.1

IKEA Skadis modular pegboard 2.0.2

IKEA Skadis modular pegboard 3.0

Print & Enjoy!

Boost Me (for free)

Boost me to help me create more quality models!

Comment & Rating (74)

@Alex_M80

Is there an assembly guide

The designer has replied

Show original

@adamkozak

the assembly is preatty simple, you just arrange the a and b modules in an alternating, checkboard-like pattern and connect them using the provided connector pins

@Alex_M80

Replying to @adamkozak :

version 2.0.2 does not seem to have pins. can the pins from this version be printed

Show original

@adamkozak

Replying to @Alex_M80 :

They're there on plate 10, but they're just the same as the ones here

@user_237153738

the connectors are slightly too big, soi had to scale the width to 98%. but otherwise, everything else works fine. thank you! :)

The designer has replied

@adamkozak

Thanks for the feedback! The fitment tollerances may vary from one filament brand to other, due to the different thermal expansion specifics, so that's totally normal

@Drewmakes.

Replying to @adamkozak :

If you want to reduce plastic waste, please add a small version with 4 holes so we can test the filament with the board ;)

@AlessandroFue

Hello, how can I adapt a board without deforming the holes? 13cm long and 100cm high will work for me. Thank you

The designer has replied

Show original

@adamkozak

Hi! Please check out the 3.0 version of the board for that, the link to it is on the top of the model description. It's more modular and allows you to make a 12cm by 100cm board, so kinda close enough.

@AlessandroFue

Replying to @adamkozak :

muchas gracias !!!

@FidgetCentral

Boosted

Good work, my board is holding up really well

The designer has replied

@adamkozak

Thank you for the boost!

@PartyPolice

will there be B module single row ends and corner ends added eventually? or am I missing something? it seems like if you have an even number of plates in your desired format you would end up with two A’s next to each other?

The designer has replied

@adamkozak

The new B modules are now available in the updated print profiles!

@PartyPolice

Replying to @adamkozak :

Amazing! Thank you!

@user_456261275

I have a question, is it compatible with any shelving system or mounts for tools or paints

The designer has replied

Show original

@adamkozak

Hi! It's compatible with all skadis compatible accessories. I also have some hooks and shelving systems of my own design on my profile, so feel free to give them a look ;)

@clairbear101

Print Profile

[PETG] 0.2mm layer, 2 walls, 15% infill

great board!

@snowblind

Print Profile

FAST MODE! [PLA] 0.24mm layer, 2 walls, 13% infill

Incredible print! Thank you so much!

@John_cipher

Print Profile

[PETG] 0.2mm layer, 2 walls, 15% infill

good

Show original

@Just2Frag

Print Profile

[PLA] 0.2mm layer, 2 walls, 15% infill

Perfect Print thanks!

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.