Search models, users, collections, and posts
MFT Bench dog for Bessey EZR, Festool FS-EZ clamps
IP Report
GIF
Print Profile(1)
0.2mm layer, 4 walls, 15% infill
Designer
54 min
1 plate
Open in Bambu Studio
Boost
11
42
0
0
20
19
Released
Description
Use Bessey ERZ, Festool FS-EZ or any compatible clamp with your MFT table / 20 mm holes bench!
Align the flat surface towards your piece. I would advise to print it with 3 or 4 layers and with PETG or something quite sturdy.
I adjusted it so that it should not slip out of the hole. It's always good to push a but while loading the clamp. Let me know if you have any issues with this, I have some other designs for such cases.
Insert the bench dog on the axis and it should be blocked at the right spot.
From my experience, you don't need more than that, but you can use the hole to fix it or adjust the friction. Let me know if it's working with other brands.
Boost Me (for free)
Boost it if you like it! It's a good doggo...
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (0)