Beach Edition Mog" Co-Pilot – Figure for Unimog - Free 3D Print Model

Search models, users, collections, and posts

Milda2107

Toys & Games>Characters

IP Report

Print Profile(2)

All

A1 mini

X1E

P2S

P1S

P1P

X1 Carbon

H2D

H2D Pro

H2C

H2S

X2D

A2L

0.08mm layer, 3 walls, 5% infill

Designer

7.3 h

1 plate

4.0(1)

0.2mm layer, 3 walls, 5% infill AMS 5 Color

Designer

20.2 h

1 plate

Open in Bambu Studio

Boost

167

122

Released

Description

Every great driver needs a co-pilot! Following the success of my drivers model, I’ve designed this female passenger figure specifically to fit the passenger seat of the Unimog U5023 by Casadio. This new "Beach Edition" version brings summer vibes to your scale builds.

This female figure is posed in a relaxed, seated position, designed to fit neatly into various scale model seats. She is outfitted for a sunny day with a detailed purple bikini, a baseball cap, and sunglasses.

Design Highlights

Easy Print Geometry: Just like the driver, I’ve designed this figure with flat spot. This allows you to print with minimal supports and ensures she sits perfectly flush against the seat.
Scale Accurate: Perfectly sized for the Casadio interior. Her legs and posture are optimized to fit the floorboard and seat height of the "Mog".
High Detail: This model features more intricate details, including a glasses, cap, and bikins.

My Finishing Process

Material: Printed in PLA.
Prep: Just Primer.
Painting: I used acrylic markers from Action for the main areas.
AMS Version: I’ve included a 4-color painted profile for AMS users.

Compatibility:

Here is my collection of all rc model figures.:

https://makerworld.com/cs/collections/21087488-rc-figures

Designed specifically for this legendary build: 👉 Unimog U5023 Replica by Casadia on Cults3D

Comment & Rating (4)

@pfefferkorn

Boosted

After encountering errors with the 0.4 mm nozzle on the A1 Mini despite various settings, changing to the 0.2 mm nozzle provided the solution. This print then proceeded without any issues

Show original

@user_137041958

Print Profile

0.08mm layer, 3 walls, 5% infill

I had problems with the support here. I had to cancel one print because the legs tore off the print bed, and on the second one, a foot is missing. I'll try again with a different support structure

The profile uploader has replied

Show original

@Milda2107

Wash the textured pei with warm water and dish soap using a sponge to remove oils and residue, then rinse thoroughly and dry completely. It works better than isopropyl in my case.

@user_137041958

Replying to @Milda2107 :

Yes, that's a general problem. But this time it has nothing to do with that, because the print plate was perfectly clean and had seen the same material before. I now have a successful print. Support structure Normal (Auto) + Infill to 45% + Z Hop increased + 50% print speed. No idea why this particular figure didn't work. It had worked without problems for many others. If that hadn't worked, I would have positioned it differently.

Show original

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.