JJ-CCR Counterlung Fan
Print Profile(1)
Description
USB 40×40 fan for drying the JJ-CCR counterlung.
It is attached to the T-piece and powered via a power bank or a power supply.
Required components:
- 40×40 USB fan
- Cover grille / dust filter
- 4× M3 threaded inserts
- 4× M3x16 countersunk screws
- 1× cable tie, 1.8 mm wide
- O-ring 34×1.75 (can be taken from an Apex revision kit), alternatively 34×2 (not tested)
USB 40×40 fan for drying the JJ-CCR counterlung.
It is attached to the T-piece and powered via a power bank or a power supply.
Required components:
- 40×40 USB fan
- Cover grille / dust filter
- 4× M3 threaded inserts
- 4× M3x16 countersunk screws
- 1× cable tie, 1.8 mm wide
- O-ring 34×1.75 (can be taken from an Apex revision kit), alternatively 34×2 (not tested)
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)