3Dudes

cover

1000049378.jpg

1000049379.jpg

1000049380.jpg

1000049381.jpg

plate_1.png

0.2mm layer, 2 walls, 15% infill

plate_2.png

Kreativling

Unbenannt.jpg

photo_2026-02-16_11-03-26.jpg

Profile for using 2 buildplates: each for one color. With the original printing profile you have to produce 2 eggs (4 parts) if you want different colors.

2 plates for different colors - 0.2mm layer, 2 walls

Unbenann2t.jpg

With this profile you print first one color and then change filament with your AMS to print the second color on the same plate.The original profile has just 1 color for 1 plate, so you need to print 2 eggs (4 parts) to have different colors.

1 plate - different colors - 0.2mm layer, 2 walls

3D Prince

Copilot_20260422_125353.png

cedca3b0-447a-4157-820f-ce8a8d0670b1.jpg

8d69747d-bf6a-49e9-84a4-45b7bfb8488b.jpg

many many substantial value adding adjustments also that result in low filament material waist and quick print time with reasonably good strength…&nbsp;see the specifics below…  0.25mm layer, 1 walls, 0.6mm wall width, 0% infill, wall generator arachne, detect over hang walls off, detect narrow internal solid infill off, ensure vertical shell thickness disabled, acceleration speed [ short travel , initial layer travel, initial layer, outer wall, top surface ] all turned up to 10000mms. max volumetric speed for PLA, and PETG both set to 30mm3/s, cooling for over hangs set to 100%, minimum fan for layers less than 4 seconds 100% and for the other layer times 100% and auxiliary part cooling fan 70%.note that filament flow, and cooling settings will likely revert to default and acceleration speed will also likely revert to default if you use a different Bambu printer.&nbsp;&nbsp;

Carefully Tuned 4 Material Waist & Stronger Base Stops Split

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

Ein wunderschönes Drachenei jetzt endlich in der beliebten Spiral Fidget Form. Ich hoffe es gefällt euch und ihr hab euren Spaß damit :)

A beautiful dragon egg now finally in the popular Spiral Fidget form. I hope you like it and have fun with it :)

Print Profile(4)

Bill of Materials

Description

Comment & Rating (240)

License