Hitster holder tower! - Free 3D Print Model

Search models, users, collections, and posts

Madsie12345

Toys & Games>Board Games

IP Report

Print Profile(1)

All

P1S

H2D

X1 Carbon

H2D Pro

P1P

H2C

H2S

P2S

X1E

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

7 h

1 plate

4.6(59)

Open in Bambu Studio

Boost

549

2012

2 k

931

Released

Description

This is a model that you can use. To play hitster pull a card out scan it with your phone. For easy playing.
And easy scanning.

Comment & Rating (74)

@user_2672777307

Einwandfrei!

@Thalgrund

Boosted

How are you supposed to get the cards out of there? There is no gap.

Show original

@Headshooter

I'm not so convinced by it. It tears on me in between. And I was already printing very slowly. What am I doing wrong?

The designer has replied

Show original

@Madsie12345

it seems your filament is not properly dried. and due to the environment there are some adhesion issues. can you try with other filament?

@TomPro

Everything worked perfectly, looks great and fits all phone sizes

The designer has replied

Show original

@Madsie12345

already Have fun!

Show original

@Thalgrund

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Great idea to make the game easier to play. Unfortunately, almost no gap was created. Despite calibrated PLA and supports. I had to rework the slot with a scalpel

Show original

@Hasenstall

Print Profile

0.2mm layer, 2 walls, 15% infill

Good model. Where the cards rest, a chamfer can be added inside at the bottom, then less support structure is needed

Show original

@Dr4XQs

Print Profile

0.2mm layer, 2 walls, 15% infill

The print ran flawlessly, supports in the tower were a bit fiddly to remove. The output slot had to be slightly improved with a cutter, but otherwise everything was great. The phone fit in any player and the most important thing -> with a case! No annoying removal beforehand👍🏼

Show original

@user_1098638756

good idea, only the hitster developers have now introduced on iOS that you have to turn the smartphone around 🙈

Show original

@Lukas_Hi

The setting can be deactivated 👍🏽

Show original

@Spiro_Agnew

You can also just turn the code

@user_4032540161

Clean print, the support structure was easy to remove. I only had to slightly rework the card output slot with a cutter. But that was no problem. Thanks

Show original

@timobr

Looks really neat, but what size/model phones will it work with?

The designer has replied

@Madsie12345

made it very big so it will hold any phone. even an iphone 16 or samsung s25

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.