Xbox 360 Slim 2.5" SSD Adapter
Print Profile(2)
Description
Boost Me (for free)
🚀 If you enjoyed this model, a Boost is the best way to support my work. Thank you!
Adapter that will let you use a 2.5" SSD in a modded Xbox 360 Slim (aka Xbox 360 S). Just slide the drive in, and then plug into your 360. Be sure to pay attention to the orientation of the plug. Includes holes on the back so you can pull this out of the 360 with pliers (or tie a string/ribbon around it), and some thumb cutouts up top for easier drive removal.
Note: Should print fine at 200um layers in PLA, but you may need a smaller layer height for materials like ABS/Nylon for the hexagons to come out nicely. No supports needed. Prints vertically, may need a small brim if you bed adhesion isn't great.
Browse my full fidget cube Collection → Fidget Cubes
Most of my models are SDFL (personal/non-commercial) // Yet Another Fidget Infinity Cube v2 is CC BY-SA 4.0 (sell with attribution)
──────────
──────────
Boost Me (for free)
🙏 If this print worked out for you, I’d really appreciate a Boost. Thanks!
License
Comment & Rating (47)