simple 8 shot ring cap impact grenade (v1)
Print Profile(1)
Description
I made this lightweight and simple airsoft impact grenade for the 8 shot ring caps (for one). This is really simple as I said and you may need to file the top of those notches on the moving part a bit. Also you may need to heat the nut to get it in the housing. You need M3 x 8mm screw with a nut and a m4 x 20mm screw also with a nut. The spring is 18mm long 10mm wide and when its compressed its 4.5-4mm the wire diameter is 0.7mm. I will improve this design and right now I cant guarantee for it to work. I used pla+
You arm it by pressing the moving part down and twisting counter clockwise. I do this with some pliers but I will probably make a tool for it too.
Please help me improve this in the comments. Thanks!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)