Skadis Stacked for A1 mini

Couldn't find any stacked skadis pegboards so I made one up in the slicer quickly. I'm guessing it's because it's much cheaper to just grab it from ikea instead.

Did this with wet filament across different brands as a worst case scenario. I did the supports at incredibly slow speeds, so YMMV if you turn up the speeds. You can test things out with just 2 boards first. Images provided to show that it is possible to do with 4 boards on a bedslinger though it was quite messy. 

This one fits on the A1 mini and I've kept the support layers at 3 so that it peels off in one piece and doesn't break apart in your hands during separation. Last image shows the separation result. 

I'll expand this to more board sizes in the future once I've done more testing with bigger printers. 

AMS or any kind of MMU is required.