D-Rock Battery Protection Fin – V1 / V2 / V3
Print Profile(1)
Description
This fin is designed for D-Rock V1 / V2 / V3 and helps protect the battery from strong frontal impacts.
The goal is to add protection while keeping the part smartly optimized for weight and strength.
The model is designed to be printed using two different density zones, so you get maximum strength where needed and weight saving where possible.
🧩 Recommended Print Settings
Lower Section (Impact Zone)
- Infill: 100%
Upper Section (Weight Optimized Zone)
- Infill: 25%
- Infill Pattern: Gyroid
- Walls / Perimeters: 4 lines (instead of the usual 3)
✂️ Density Transition Height
The transition between the two print densities should be set at:
👉 12 mm from the build plate
This is especially useful if you are slicing or printing this model on different printers.
📌 Usage Notes
This model is shared for personal use only.
Please do not:
- Modify and redistribute the model
- Sell the model or printed parts
If you need custom changes, improvements, or adaptations, feel free to contact me through my social channels Instagram — I’m always happy to help the community 🤝
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)