MOZA SR-P Pedals Return Spring. Clutch / Brake

• If ur using TPU 90a/95a make sure to use 5-6 walls and 50% infill

TPU  spring designed specifically for the MOZA SR-P or SR-P Lite pedals.

Provides a more progressive, tunable pedal feel for both clutch and brake use. 

Printed in Bambu TPU (AMS-compatible), but standard TPU works just as well.

Infill percentage and print settings directly affect stiffness

This spring can be flipped and works with brake and clutch, look at picture for orientation. 

HARDWARE -

• 4 - M4 X 5MM. per pedal,  length don't matter after 5mm

• If ur using TPU 90a/95a make sure to use 5-6 walls and 50% infill

Recommended Print Settings -

• Material: TPU (Bambu TPU or equivalent)
• Walls: 3
• Infill: 15% 
• Higher infill/walls = firmer pedal
• Lower infill/walls = softer, longer travel