Yugi Moto Hueforge Slifer the Sky Dragon Yu-Gi-Oh
Print Profile(1)
Description
Project: Yugi Slifer.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 245x245mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
Filaments Used: (* = Owned)
#91202b * PLA eSun Fire Engine Red Transmission Distance: 5
#cd001a * PLA eSun Red Transmission Distance: 4.8
#e9e795 * PLA eSun Almond Yellow Transmission Distance: 5
#e1e4e7 * PLA eSun Cool White Transmission Distance: 2
This print uses 4 unique filaments
Swap Instructions:
Start with Fire Engine Red
At layer #8 (0.72mm) swap to Red
At layer #14 (1.2mm) swap to Almond Yellow
At layer #22 (1.84mm) swap to Cool White
Border Only Colors from here until the end.
At layer #28 (2.32mm) swap to Fire Engine Red for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)