Motorcycle Armor Back Protector

I printed this using TPU 90A and designed it myself. I modeled it after the inserts in my Pando Moto pants. Please use the settings in my 3mf if you are using 90a TPU. In my opinion it is the best in between hardness and softness while still being similar enough to my other protective inserts. (calibrated for my 90a filament) If you are using other filaments I recommend you cutting the file into little pieces to test that you like the softness-hardness levels before printing the whole thing. I super glued the two pieces together then used some pipe cleaner things to tie them together as well. 

This was just a fun project I did, please use at your own risk. Don't expect this to actually protect you in a crash, thank you. 

DISCLAIMER OF LIABILITY

This motorcycle back protector design is provided "as-is" for informational and recreational purposes only. By downloading, printing, or using this design, you acknowledge and agree that:

1. This product is NOT certified safety equipment and has not been tested to any official safety standards (CE, DOT, etc.).
2. You assume all risks associated with manufacturing, fitting, and using this back protector.
3. The designer makes no warranties, express or implied, regarding the protective capabilities, durability, or fitness for any particular purpose of this design.
4. You release the designer from any and all liability for personal injury, death, property damage, or any other losses that may result from the use or misuse of this design.
5. This is not a substitute for professionally manufactured, certified protective equipment.

USE AT YOUR OWN RISK. If you require certified protective equipment, purchase commercially available, safety-tested gear from reputable manufacturers.