Search models, users, collections, and posts
Wardrobe Hanging Rod Holder/Bracket - Clip-in
IP Report
Print Profile(4)
0.2mm layer, 6 walls, 100% infill
45 min
1 plate
0.2mm layer, 6 walls, 100% infill
48 min
1 plate
0.2mm layer, 6 walls, 100% infill
49 min
1 plate
0.2mm layer, 4 walls, 60% infill
51 min
1 plate
Open in Bambu Studio
Boost
564
1570
75
36
1 k
720
Released
Description
A simple coat rod holder for your wardrobe.
Pictured - 22.4mm inner diameter bracket for a 22mm wooden broom stick, I've made models for a few other diameters
Screw hole diameter: top of countersink is 9mm, hole is 4.5mm
Screw a bracket to each side, cut your rod to length, and snap into place.
I printed mine with PETG, 3 walls, 3 top, 3 bottom, 30% infill, 0.4mm nozzle and 0.2mm layer height.
Add a colour change for a little accent!
License
This user content is licensed under a
Creative Commons Attribution
Comment & Rating (75)