V2 Wearable Helmet/Mask of the Witch-King - LOTR - Free 3D Print Model

Search models, users, collections, and posts

NR Workshop

Props & Cosplays>Masks & Helmets

IP Report

Print Profile(2)

All

A1 mini

H2C

X1 Carbon

H2D

P1P

P2S

X1E

P1S

H2S

H2D Pro

X2D

A2L

A1 Mini Capable! (0.2mm LH, 3 walls, 9% infill)

Designer

28 h

4 plates

4.9(12)

PLA Tough, 100% Size, (0.18mm LH, 2 walls, 10% infill)

Designer

23.1 h

2 plates

5.0(8)

Open in Bambu Studio

Boost

469

1475

761

268

Released

Bill of Materials

Bambu Filaments

Select all

Silver (12106) / Filament with Spool / 1kg

PLA Tough+

Description

Here is my new version of the helmet/mask of the Witch King of Angmar! I up-scaled it to perfectly fit most heads, 125% larger than the previous version. I also added tabs to make assembly much easier. I can vouch for that, the tabs work perfectly! It almost stays together without glue! The pieces are also much smaller, making for an easy print and A1 Mini capability! The helmet looks best in Silver PLA Matte! But you will want to add glue to keep it together.

I also made it so that an A1 mini could even print it!

Thank You!
A huge thanks to everyone who’s supported my work by downloading, printing, and sharing my models here on MakerWorld. Your encouragement and feedback mean the world to me and keep me inspired to keep creating.

Boost Me (for free)

If you enjoy my models, giving them a boost is an awesome way to show support and help more makers discover them. I appreciate every one of you!

lord of the rings art

Comment & Rating (88)

@SlyMecha

Boosted

Made a slight modification, but it turned out great!

The designer has replied

@NRWorkshop

Great addition! 😂 Thanks for the boost!

@user_219100039

is the beak a print profile? if not could you make one compatible for p1s?

@SlyMecha

Boosted

Replying to @user_219100039 :

it was just my own fun thing, give me some time and I can try to upload it. I'm not the most experienced with uploading.

@Cheeseburger89

Boosted

Print Profile

PLA Tough, 100% Size, (0.18mm LH, 2 walls, 10% infill)

I'm changing my review I figured out how to get this supports off sorry

(Edited)

The profile uploader has replied

@NRWorkshop

I just looked at both print profiles and there is no problem with either, this is a picture of the downloading and slice model you pictured. There is no problem, did you change anything in the slicing? Try opening the print profile directly from the model and slicing it, it should be correct.

@NRWorkshop

Thanks for your rating, feedback, and support! If you enjoy this model, I have many more like it. You should go check them out!

@Cheeseburger89

Boosted

Replying to @NRWorkshop :

yeah my bad! IDK what happened though, I did not change anything Just opened in bambu studio and started printing. but who knows. Either way, it's a fantastic model!!! I can't wait to finish/paint it !!

@user_1360500209

Print Profile

PLA Tough, 100% Size, (0.18mm LH, 2 walls, 10% infill)

Printed great, just a touch too small for me to wear, but it makes an amazing decoration. I can't wait to finish painting it.

The profile uploader has replied

@NRWorkshop

Looks great! Thanks for your rating, feedback, and support! Make sure to check out my other models!

@EZ3D_

Boosted

Hi @user_1360500209 I love how you mounted it to your wall, how did you achieve it because it looks amazing! Thank you 😁

@user_347599930

Replying to @EZ3D_ :

i think you could put a nail and make so it holds it

@user_931708673

Boosted

Print Profile

A1 Mini Capable! (0.2mm LH, 3 walls, 9% infill)

Great print file. Worked the first time. Thank you very much

The profile uploader has replied

Show original

@NRWorkshop

Great! Thanks for your feedback, rating, and boost! Make sure to check out my other models!

@knick31

Boosted

Great print no issues at all.

The designer has replied

@NRWorkshop

Great! Thanks for your feedback and boost! Make sure to check out my other models!

@3Dprinttechniek

Print Profile

PLA Tough, 100% Size, (0.18mm LH, 2 walls, 10% infill)

super design ben er blij mee paste ook perfect ik heb de 2 voorste helften in 1 print gedaan. dankjewel

The profile uploader has replied

@NRWorkshop

Great! Thanks for your rating, feedback, and support! Make sure to check out my other models!

@EZ3D_

Boosted

Print Profile

A1 Mini Capable! (0.2mm LH, 3 walls, 9% infill)

this is awesome

The profile uploader has replied

@NRWorkshop

Thanks for your rating, feedback, and boost! Make sure to check out my other models!

@user_625843264

Boosted

Print Profile

PLA Tough, 100% Size, (0.18mm LH, 2 walls, 10% infill)

very very good. super arranged to save time, everything worked on the first print. I will make a slot for a strap that goes over the head. Top Model. Thank you very much

The profile uploader has replied

Show original

@NRWorkshop

Great! Thanks for your rating, feedback, and support! Make sure to check out my other models!

@BetrayDawn

Print Profile

A1 Mini Capable! (0.2mm LH, 3 walls, 9% infill)

The profile uploader has replied

@NRWorkshop

Thanks for your rating and support! Make sure to check out my other models!

@user_1991140830

Print Profile

PLA Tough, 100% Size, (0.18mm LH, 2 walls, 10% infill)

(Edited)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.