Fallout T45-d, T51-b, T60-c, X01 Power Armor Mini

I DID NOT Create these Models - Original Maker is “Miffles_Makes” on Thingiverse

I really liked these models and wanted to make the models more easily accessible in bambu studio like a kit so I have included each armor as a separate 3mf and I included the most basic versions of the armors as 2 other 3mf files. 
 

These models DO need to be glued together (9 pieces per model), I suggest a combination of thin and thick (or gel) Super Glue

There are 2 versions, the 100% models that are actual miniature size (roughly D&D and 40K Mini Sized) which I would suggest printing with a 0.2mm nozzle to get more detail but is very doable with a 0.4mm nozzle, just be careful breaking off supports and beware that the Fusion Core Section does not come out as detailed. 

I scaled each model up to 151% as they fit on my shelf nicely and done take up too much room while still having details. 

please enjoy these layouts, I am currently gluing together my 151% models and will add additional pictures once they are together and even some pictures of them painted.

Feel Free to Scale them to fit your needs, I do not suggest scaling below 100%. If printing from the 100% scale models beware there is quiet a bit of scrap supports

Edit 2/3/2026: the other 3mf files I mention above are currently accessible when downloading as STL and Cad files as they did not upload properly to Makerworld. I will be updating them to be accessible as print profiles later this evening. 

Edit: 2/3/2026: (but later) print profiles have been added for the above described separate models