Chevrolet Silverado Switch Panel (2014-2018)
Print Profile(1)

Description
A small switch panel that fits 2014-2018 Chevy Silverado center consoles. Light modification to the center console is required. The center pocket of the triple-pocket behind the cupholder needs to be removed to make room for the wiring on the underside of the switches.
Required Components:
- (4) Screws of your choice. I used buttonhead Phillips sheet metal screws with a coarse thread and gently ran them directly into the plastic of the center console. This kept me from having to disassemble the console to put a nut on the bottom.
- (4) Switches
The mounting holes are now elongated to make install a bit easier (you don't have to be as precise with your hole pattern on the console).
Filament Choice:
Printed in Polylite ASA to prevent warping/sagging in a hot vehicle. Keep in mind this is going in a vehicle that may experience a good deal of heat inside. That being said, I had originally printed this in PETG it worked well until I replaced it with the ASA variant.
I hope you enjoy this design! If you find this useful, please consider boosting this model, or “buying me a coffee.”
Boost Me (for free)
If you enjoy this design, please consider a Boost! It directly supports my creativity and future designs. Thank you!

License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.




















Comment & Rating (1)