Fix for Marble Escape
Print Profile(1)
Description
This is an updated part for the original Bambu Labs Marble Run 003. It is only needed to be used if you printed the Marble Escape ladder from MPlusM which you can find here. https://makerworld.com/en/models/1186790-marble-run-003-jump-ramp-escape-addon-v2#profileId-1197890
I have printed 3 of the Marble runs for my kids and installed the Marble Escape V2. What happens is occasionally the marble may hit the under side of this section. It all depends on how your prints turned out and how well the assembly went together. It does not happen all the time. I cut a notch in the underside of this model to allow ample room for the marbles to go under and continue without getting stuck.
Bambu Lab A1
PLA
.20 nozzle
2 walls
15% infill
.36 Z distance on top of support.
This remix is based on
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (2)