Bambu Lab

cover

20230825-085306.png

plate_1.png

plate_2.png

plate_3.png

plate_4.png

plate_5.png

plate_6.png

plate_7.png

plate_8.png

plate_9.png

plate_10.png

plate_11.png

img_v2_e36885d0-a54f-492b-a326-651cd597787g.webp

plate_1.webp

plate_2.webp

plate_3.webp

plate_4.webp

plate_5.webp

plate_6.webp

plate_7.webp

plate_8.webp

plate_9.webp

plate_10.webp

plate_11.webp

-0.2 layer height-Print without support

0.2mm layer, 2 walls, 15% infill

waywood.ben

PXL_20231102_201735913.webp

Takes a little longer to print but stands up much better to kids being rough with it. You can print plate by plate with a different colour each time

Organsied by part type to allow multi colour on any printer. High quality, strong, and safe

user_3796828954

387505576_2026845867679993_4684502380845580738_n.webp

0.2mm layer, 2 walls, 15% infill9 plates6 color

小厮工作室

e7238547430dee9c74af9111fa1031b_8e628b19-13cc-41cb-93be-cb7d6d7d2ba9.webp

8dd0603904a23781c4ab7f818df3d6b_a74e1e64-600a-4b09-889d-6c854d3ab7fd.webp

df1cfa152edd71787b799349f75542c_8b65eccd-94d1-46e8-b420-678f80ff88ed.webp

使用红白蓝三种配色仅需6盘

Using red, white and blue color schemeOnly needs 6 plates

Three-color printing, only needs 6 plates, suitable for P1P P1S 0.2mm layer, 2 walls, 15% infill

white

cyan

yellow

light blue

Wayne Han

WechatIMG2888.jpg

2024-07-10_45f102a8eafde

_(1).2024-07-10_f620b17db7c95

_(2).2024-07-10_8d9de67c9818f

_(3).2024-07-10_95fd01dc80d64

_(4).2024-07-10_d309c196d2544

_(5).2024-07-10_c019db0dda701

_(6).2024-07-10_47cbb2a9b7431

_(7).2024-07-10_d397d2a88bf1e

_(8).2024-07-10_75e30fc37e4bb

四色打印，我认为是最漂亮的组合，并且我已经精简了摆盘

Four-color printing, I think it's the most beautiful combination, and I have streamlined the plate arrangement

4-color printing, plate merging

TheChrisgamer

20240530_174209_a013baf2-44e1-4660-bdbd-25e5ea95bd84.webp

20240530_174225_c4f88567-59aa-4ff9-a0ca-6217fcdef06a.webp

20240530_174230_c101f9e5-a14e-4553-a138-120c11937ef3.webp

English: this is a colored version of the marble run 003 kit. its a mix of the 2 pictures on the bambulab shop. I made sure that there were as few printing plates as possible.&nbsp; The print profile was adapted to the larger printers A1, P1 + X1.&nbsp;Deutsch:&nbsp; Dies ist eine farbige Version des Murmelbahn-Bausatzes 003. Es ist eine Mischung aus den beiden Bildern im Bambulab-Shop. Ich habe darauf geachtet das es so wenige Druckplatten sind wie nur geht.&nbsp; Das Print Profil wurde auf die Größeren Drucker A1, P1 + X1 angepasst.&nbsp;

Marble Run 003 Colored version

Sakura

微信图片_20240604115524_c2c287b7-889a-4d8c-88a2-e4da187aec7a.webp

48A1F3F942B4E67F207B5C64AC9F1415_b30e3f78-918f-4b10-acd2-244c9f94bf52.webp

<ul><li>缩减至10盘</li><li>已为各盘上色</li><li>第一盘无法添加支持，但打印正常，具体看图</li><li>第五盘需手动添加支撑，舍弃超出热床的一点</li><li>JAYO PLA 修改喷嘴温度至215°</li><li>白色为传送带支持，蓝色为底座零件，红色为轨道</li></ul>

<ul><li>Reduced to 10 plates</li><li>Each plate has been colored</li><li>The first plate cannot add support, but the printing is normal, see the picture for details</li><li>The fifth plate needs to add support manually, discard the part that exceeds the hot bed</li><li>JAYO PLA modify nozzle temperature to 215°</li><li>White is the support for the conveyor belt, blue is the base part, red is the track</li></ul>

0.2mm layer, 2 walls, 15% infill white/Blue/Red

linxinyuan

Weixin Image_20240105143945_ff20b37e-26d4-4d3a-9252-d46d464bd5fe.webp

QuiqueCrimson

20231014_103100_72add9d8-197b-4994-a206-c83ac63ec951.webp

20231014_103118_2d046057-e064-415e-9962-eb64b6f257a0.webp

20231014_103053_3dc2325d-3bd2-4340-9530-6c3ba58b4f4a.webp

Ska¨rmavbild 2023-09-22 kl. 19.23.28.webp

7 color scheme.&nbsp;gears al plate 10 are 4 walls and 20% infill

Org by colors. 0.2mm layer, 2 walls, 10% infill (except gears plate 10 - 4 walls, 20% infill)

PXL_20231023_102737697.MP.webp

This has the same print settings as my 4.9 star rated print profile. I have rearranged the plates and colored the track red, the structure marble, and the “machinery” Iron Gray Metallic

AMS version!

jdicerchio

IMG_2462_fac99bb2-f91d-4a2a-a765-595dc6c17789.webp

I had these 20mm power switches lying around and was tired of having to unplug/plug this back into the wall for my kid. I added this power switch mount which takes the place of the previous motor mount. &nbsp;Supports are unfortunately required. &nbsp;https://www.amazon.com/gp/product/B07S1MV462/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Power Switch mount for Bambu Marble Run - 0.2mm layer, 2 walls, 15% infill

textendo prints

marble run.jpg

0.28mm layer, 2 walls, 15% infill

LayerCraft

IMG_1475-ezgif.com-video-to-gif-converter.gif

IMG_1484-ezgif.com-video-to-gif-converter.gif

Replacement Marbles

SprunkiFan9017

image.jpg

Actually, mine have some defects when printed with third-party PLA so I recommend using Bambu Filament.

Funnel piece with higher resolution

Philmathic

IMG_20250112_120052.jpg

IMG_20250112_115332.jpg

IMG_20250112_115341.jpg

Wenn die Murmelkette zu stramm sitzt und nicht läuft habe ich diesen Stift auf 86% skaliert.

If the marble chain is too tight and doesn't run, I scaled this pin to 86%

0.26mm layer, 2 walls, 15% infill

rjhanny

Screenshot 2025-01-20 093254.png

I&#39;ve found that marbles fall off at the very first top corner. I have raised the sides a bit to prevent this from happening.

0.16mm layer, 2 walls, 10% infill

1000002231.jpg

1000002238.jpg

Screenshot 2025-06-19 111844.png

1000002239.jpg

I am having problems with Bambu Lab&#39;s print profile that marbles sometimes get stuck on the ramp of the lift platform around the chain lift. This is due to the layer height being too large. I used waywood.ben&#39;s “Organised by part type to allow multi colour on any printer. High quality, strong and safe&#34; print profile and added a variable layer height on it such that it prints 0.08mm layers only on the ramp. Now marbles will never get stuck again!

Lift platform with variable layer height

IMG_7434.jpeg

⚠️⚠️⚠️WARNING: BEFORE YOU LEAVE A BAD REVIEW, PLEASE PRINT SOME ALTERNATIVE PRINT PROFILES AND MODELS FROM ME, MPLUSM AND BAMBAM DESIGN. ANY BAD RATINGS FROM 1-2 STARS THAT SAYS “Missing Model Parts” WILL BE REPORTED FOR MISINFORMATION IF YOU DON&#39;T UPDATE IT WITHIN A PERIOD OF TIME AFTER I REPLIED. 3 STARS IS FINE, BUT IF IT ABOUT MISSING MODEL PARTS THEN I WILL WAIT FOR A WHILE FOR YOU TO UPDATE THE RATING ONCE I REPLIED TO YOUR RATING. PLEASE BE EXTREMELY CAREFUL WHEN RATING THIS PROFILE.This print profile is modified from another user&#39;s print profile to print with 13% tri-hexagon infill instead of 15% adaptive cubic infill. I did this because of a 1-star rating by Amn2009 on BBL&#39;s print profile that complained about the adaptive cubic infill.After finishing printing all parts on the print profile, please print the following print profiles on this model:<ol><li>Funnel piece with higher resolution</li><li>Lift platform with variable layer height</li></ol>There are also some alternatives outside of this model (a completely new model), including:MplusM:<ol><li>Marble Run 003 launch platform / redesigned posts (<a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/models/142071-marble-run-003-launch-platform-redesigned-posts#profileId-154685">https://makerworld.com/en/models/142071-marble-run-003-launch-platform-redesigned-posts#profileId-154685</a>)</li><li>Marble Run 003 Jump Catcher (<a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/models/142104-marble-run-003-jump-catcher#profileId-154731">https://makerworld.com/en/models/142104-marble-run-003-jump-catcher#profileId-154731</a>)</li><li>Marble Run 003 Jump Ramp Escape Addon v2 (<a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/models/1186790-marble-run-003-jump-ramp-escape-addon-v2#profileId-1197890">https://makerworld.com/en/models/1186790-marble-run-003-jump-ramp-escape-addon-v2#profileId-1197890</a>)</li><li>Marble Run 003 Motor and Cable Protection (<a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/models/153318-marble-run-003-motor-and-cable-protection#profileId-167447">https://makerworld.com/en/models/153318-marble-run-003-motor-and-cable-protection#profileId-167447</a>)</li></ol>The jump ramp escape addon has the jump catcher included. However, if you wish to print all alternatives and leave a rating for all models, you can print the escape stairs addon first, then the jump catcher in another model and print profile. Printing them altogether in 1 plate means that you cannot rate all models because importing a 3mf file just by it&#39;s geometry doesn&#39;t mean you can rate the file you imported. However, if you already have the rating for all of these models but it&#39;s a remake of it, printing them all on 1 plate is possible, but most likely only on the H2D (I think).BamBamDesign: The Better Y Part for Marble Run 003 (<a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/models/52635-the-better-y-part-for-marble-run-003?from=search#profileId-54398">https://makerworld.com/en/models/52635-the-better-y-part-for-marble-run-003?from=search#profileId-54398</a>)Have fun! 😉

Print alternative print profiles & models after this

CoteX

20251221 112236 Mod.jpg

20251221 110755 Mod.jpg

Elevator Troubleshooting

White

Blue

20251122_165206.jpg

添加A1mini配置的红白蓝三色配置

Added a red, white, and blue three-color profile for A1 mini

bechara0

marble 1.png

marble2.png

Altura capa: 0.2Perímetros: 2Relleno: 15%No necesita soportes

Layer height: 0.2Walls: 2Infill: 15%No supports needed

LittleFootMakersLab

IMG_5862.png

The original Marble Run 003 tracks would occasionally stop rotating or bind during operation. After troubleshooting and testing multiple versions, I found the main issue was the tight tolerances in the original design.These rebuilt tracks have been redesigned specifically for high-detail printing to improve smoothness and reliability. With the correct print settings, the tracks rotate continuously without getting stuck.<h3>Important Print Requirements</h3><ul><li>0.2mm nozzle required</li><li>0.12mm layer height recommended</li></ul>Using a larger nozzle or thicker layer height may cause the tracks to bind or stop turning due to the tight clearances required for proper movement.<h3>Improvements</h3><ul><li>Reworked tolerances for smoother operation</li><li>Reduced binding and sticking</li><li>Improved continuous rotation</li><li>Optimized for detailed, precision printing</li><li>Tested for more reliable performance</li></ul>If you had issues with the original tracks getting stuck, this version should provide a much smoother experience when printed with the recommended settings.

Tracks Fixed (No Getting Stuck) Nozzle - - .2 required

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014265/design/2023-09-19_8d08d601f168.png"></figure>Let&#39;s start a marble race with friends! This marble run features a series of elements including elevator, starting line, randomized dividers, elevated track, large funnel, spiral, and loop section. It allows competition of multiple marbles, with each segment introducing an element of unpredictability. The excitement continues all the way to the end!&nbsp;Recommended filaments: Bambu PLA series, PLA Basic is recomended for more smooth track<a target="_blank" href="https://store.bambulab.com/collections/bambu-lab-3d-printer-filament?gf_60645=279355719795" rel="nofollow noopener">https://store.bambulab.com/collections/bambu-lab-3d-printer-filament</a>Hardware Kit: Marble Run Components Kit-003<a target="_blank" href="http://store.bambulab.com/products/marble-run-components-kit-003" rel="nofollow noopener">http://store.bambulab.com/products/marble-run-components-kit-003</a>&nbsp;Please make sure you clean the build plate before printing and/or applying glue to prevent print failures.&nbsp;Follow the video tutorial step by step to print and assemble your build. <figure class="media"><div data-oembed-url="https://youtu.be/8_Su9jdzgNA"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/8_Su9jdzgNA" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Marble Run 003

Antonehhh

Placement.png

Marble Run 003 - Prevent Reverse Marbles Addon

user_2702806046

1_2e3459e1-0507-49cf-88f1-6e785933b523.jpg

2_1a938eab-6167-4f79-baef-9eba2dbab0a1.jpg

3_716bcee2-6b69-41d9-997b-87ac51392695.jpg

4_4d966b9a-9028-465d-9cd4-2cd4128f9f5c.jpg

弹珠跑道-标牌

Marble Run - Signboard

ASIA

Print Profile(22)

Bill of Materials

Description

Comment & Rating (4483)

License

Remixes (24)

Related Models