Hydraulic coupler bracket

I designed this simple to use hydraulic coupler bracket, which you can bolt on various farm machiners, to keep your hose in place and prevent your coupler from getting contaminated with dust and dirt. The bracket was designed for a 24 mm couple (just a tad bit under 24 mm, which is (I believe) the 0.9" standard.

The design might not work for heavy hoses and heavy duty applications. It was designed with ease of manipulation in mind, thus it does not hold the hose too hard. Modify the angle of cutout for heavy duty applications, or let request a redesign by me for a heavier snap fit.

Print in ABS, ASA, Nylon or PETG. Mine is printed with ABS-GF and seems to hold well so far. Do not use PETG, if you plan on keeping it exposed to the sun. PLA is a no-go.

The mounting holes are 5mm in diameter, suited for M5 bolts. Self tapping bolts work fine as well, just don't overtighten the bracket, or it might snap at the layer lines.