Zenless Zone Zero Sunna February wallpaper
Print Profile(2)
Description
Project: Sunna.hfp
Layer height of 0.08mm with 100% infill, first layer height of 0.14mm
Model size is 200x112.5mm
You can print at a higher layer height below the base thickness of 0.14mm
Maximum allowed thickness 3.18mm and actual thickness 3.18mm
#000000 IMAGE Conversion #000000 Translucency Value TD: 0.6
#8e9089 PLA Bambu Lab Basic Gray Translucency Value TD: 2
#ffffff PLA Bambu Lab Basic Jade White Translucency Value TD: 5
#c2e189 PLA Bambu Lab Matte Apple Green Translucency Value TD: 1.2
This printing uses 4 filaments
!!!! It seems you have mixed filament types. Make sure this is what you want. !!!!!!
!!!! It seems you have set 'Image Color' to 'Filament'. This cannot be printed. !!!!!!
Filament change instructions:
Start Conversion #000000
At layer #11 (0.94mm) change to Bambu Lab Basic Gray
At layer #22 (1.82mm) change to Bambu Lab Basic Jade White
At layer #36 (2.94mm) change to Bambu Lab Matte Apple Green until the end.
The horizontal and vertical hf configurations are consistent, 2 files are put together, please note to reserve printing time···
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)