lightnokitsune

cover

2.jpeg

6.jpeg

3.jpeg

4.jpeg

5.jpeg

Unsupported

plate_1.png

Supported

plate_2.png

1.jpeg

Material<ul><li>PLA: works well for indoor or short-term use</li><li>PETG: recommended for vehicle use (heat resistance, durability)</li></ul>Layer height<ul><li>0.20 mm recommended</li><li>0.16 mm if you want a slightly cleaner finish</li></ul>Walls / strength<ul><li>3 to 4 perimeters</li><li>15–20% infill (gyroid or cubic)</li></ul>&nbsp;Support options (important)You have two valid printing approaches, depending on your priorities:&nbsp;Option 1 (Plate 1) – No supports (works, faster)<ul><li>Supports: OFF</li><li>Prints successfully</li><li>The internal ceiling will be slightly stringy or rough</li><li>Acceptable if your printer is well calibrated</li><li>Cosmetic only, not visible in normal use</li></ul>Option 2 (Plate 2) – With supports (best surface finish)<ul><li>Supports: ON</li><li>Support only from build plate</li><li>Results in a clean, perfectly smooth internal ceiling</li><li>Slightly longer print time and more material</li></ul>If you want the cleanest result for work or gifting, use Option 2.&nbsp;Orientation<ul><li>Print flat on the base ring</li><li>No rotation required</li></ul>

0.2mm layer, 4 walls, 10% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

This is a protective half-shield cover for a blue emergency beacon light (often called a beacon or warning light).The purpose of this cover is to:<ul><li>Reduce glare for the driver or passengers</li><li>Block rearward or unwanted light spill</li><li>Improve comfort when the beacon is used inside a vehicle (dashboard, seat, or flat surface)</li><li>The design covers approximately half of the beacon, leaving the other side fully visible for signalling.</li></ul>Design notes<ul><li>Smooth external surface, no sharp edges</li><li>Slightly overhanging top to limit upward glare</li><li>Designed to sit securely on the beacon base</li><li>No modification of the original light required</li></ul>This model was designed and tested on a standard round blue LED beacon, as shown in the photos.&nbsp;Disclaimer / usage noteThis model is provided for personal, non-commercial use. Ensure compliance with local laws and regulations regarding the use of emergency or warning lights in vehicles.

Blue Beacon Light Shield / Anti-Glare Cover

ASIA

Print Profile(1)

Description

Comment & Rating (5)

License

Related Models