Beer Bottle Holder / Carrier cut for A1 mini

I modified the model by cutting it into 3 main parts so that it can be printed on the A1 MINI (or any other printer with bed size of 180mm or bigger). 
This fits most beer bottles (all that I have tried). The lip needs to be at least 25mm and the neck should be max. 25mm in diameter (not including the lip).

I printed in PETG, but it should also be fine out of PLA and most other materials 

Assembly

You can add glue (optional) during any step of the assembly, but it's important that you follow the order of the steps! The model works with and without glue. I recommend not gluing the handle (step 2) for more compact transport.

Step 1:

Take holder part A and B and align them as shown in the picture

Put in both pins (might require some force)

Step 2:

Put the handle through the part that you just assembled (this should not require much force)

Step 3:

Put both clips into their corresponding slots. This might require some force. If fully seated they should be flush.

I hope I could help you out with this remix :)