ARC Raiders - Venator IV

UPDATED 30/01/26: Edited several parts to add small details.

Introduction

Don't Shoot! —The 'ARC Raiders - Venator IV'  brings the unmistakable look and vibe of the in-game Venator IV straight into the real world. Built for fans, collectors, and sci-fi obsessives, it’s packed with satisfying details that make it feel like it just stepped out into the Rust Belt.

Features & Highlights

• Game-Inspired Design - Faithfully modelled after the ARC Raiders Venator IV using the in-game ‘Inspect’ tool, capturing its iconic silhouette and futuristic attitude.
• Magnetic Removable Magazine - Snap it in, pull it out—click. The magazine attaches magnetically and features visible bullets for an extra hit of realism.
• Light-Up Side Barrel - Integrated lighting in the side barrel mimics the glowing energy effect seen in-game, giving it that unmistakable ARC tech feel.
• Perfect for Display or Cosplay - Lightweight and balanced, making it ideal for shelves, conventions, photoshoots, or just admiring between missions.
• Fan-Made Collector Piece - Designed by fans, for fans—an eye-catching tribute to one of ARC Raiders’ standout weapons.

Whether it’s mounted on your wall, sitting on your desk, or starring in your next cosplay, this piece is all about style, immersion, and pure sci-fi swagger.

⚠️ Note: This is a non-functional, 3D-printed replica intended for display or cosplay use only.

Model Details

• Straight-forward print and assembly (No guide required).
• Minimal supports, some glue required, no AMS required.
• A PDF with the label for the stand is in the ‘Documentation’ section (Assembly Guide section on the Bambu Handy app).
• The stand has a separate print profile and although it serves its purpose, I will be looking at improving it in the near future.
• Easy installation of LED, no soldering required.
• The LED listed just slots inside the Side Barrel, if it is too loose just wrap a little bit if tape around it so that the fit is snug.
• 5x 5mmx2mm magnets required. 2 for the Magazine, 2 for inside the Grip and 1 for the Magnet Key.
• The magnets are a little fiddly to install inside the grip. I just stuck the magnets to the end of a steal rod and glue them in. Alternatively, you could pause the print on Plate 1 at layer 275 and insert them in then.
• If you plan on painting the gun, don't place the bullets in the magazine until after painting. The small Magazine Cap is glued in place and not designed to be removable.

Basic Paint Instructions:

1. Used some 800 grit sandpaper and lightly sanded every surface on the gun.
2. Make sure all surface are clean and free of sanded plastic.
3. Applied 2 coats of ‘spray putter’ as a primer. Use some 800 or 1000 grit sandpaper to wet sand in between coats.
4. Applied 2 coats of acrylic based ‘satin black’ spray paint.
5. Used some ‘metallic silver’ acrylic paint and applied using a ‘dry brushing’ technique.
6. For the grip, use a sponge to dab a black wash and then a dark brown wash until you achieve a ‘aged’ leather look.

YouTube Demo

Possible Future Updates

• Extended Medium Magazine
• Vertical Grip
• Silencer

This model has been made available to download and print for free with a great deal of time and effort going into designing and presenting it here on MakerWorld. If you enjoyed this model please give generous consideration to leaving a Boost or a Rating — it’s a quick, easy and free way to show appreciation and helps support my work here on MakerWorld. Thanks for checking out my designs!