Filament Swatch for Dry Box (Yashe) V2

Filament Swatch for YASHE 3.7L cereal box

Attaches firmly to the outside of the box. Easy insertion and removal by hand. Can be removed for inspection without opening the dry box.

Strongly recommended for the Filament Dry Box (Yashe). The dry box is ergonomic, minimalistic and only 23g.

Tested with PLA and PETG. Should work fine as-is even with shrinkage prone materials like ABS due to its short height (please tell me if you have success/failure).

You can print multiple swatches in different colors at the same time with an AMS, set Others → Print sequence to “By object” in Bambu Studio.

Features

• Only 7g, prints fast, very robust.
• Attaches firmly to the box, will not come loose.
• Easy insertion and removal by hand.
• Includes 0.2-2.0mm opacity chart.

Instructions

To attach the swatch, simply press the swatch against the lip of the box until it clicks into place. Slide it horizontally to center it. Make sure to click it firmly into place, if the front latch won't fully close then the swatch has not been pushed fully into place.

To remove the swatch, slide the swatch sideways until it detaches from the box.

The swatch slightly blocks access to the front latch when opening the box. To open the box, simply press down on the lid near the swatch and the latch will open by itself. Alternatively, release the latch in the back instead and then simply remove the lid as normal.