Vibin3D

cover

model_photo1.png

model_photo3.png

model_photo5.png

X59_model2.png

X59_model4.png

X59_stand1.png

X-59_decals.png

20260305_081705.png

plate_1.png

stand_photo.jpg

Stand: 0.16mm layer, 2 walls, 15% infill

2026-01-26_3cac791625bdf.png

X-59: 0.16mm layer, 2 walls, 15% infill

20260218_202436.jpg

Split version of the model printed at 2x size. Tight fit on the P1S.

2X Size with Split Model

Split model print saves time and waste at original model scale. 4 models fit on the P1S bed and uses about 600g of filament and prints in a day and a half.

4 Split Models

https://www.nasa.gov/stem-content/x-59-3d-printing/

<boostme><boosttitle>Boost Me</boosttitle></boostme>&nbsp;Multicolor version of <a target="_blank" rel="noopener noreferrer ugc" href="https://www.nasa.gov/stem-content/x-59-3d-printing/">NASA&#39;s 3D model</a> of the NASA/Lockheed Martin X-59.  Included a version cut with an alignment plug for either printing at larger scale or reducing print time and waste. Also, designed a new base for the NASA stand design with embossed logo. Tail graphics sized to model scale for decals.&nbsp;Model photo shown printed with 0.4mm nozzle with 0.16mm layer height at 35deg AOA in 4 matte PLA colors (gray, navy blue, red, and white). Recommend doing a purge calibration to minimize waste. Tail graphics added as printed decals.&nbsp;&nbsp;&nbsp;

X-59 Multicolor

ASIA

Print Profile(4)

Description

Comment & Rating (1)

This remix is based on

License

Related Models