Barbell Fixing Clips (25;30mm)
Print Profile(2)
Description
These are a dumbbell clips a simple and reliable solution for keeping weight plates firmly in place during workouts.
This Model Includes 2 versions:
- Ø25mm version
- Ø30mm version
The two parts (Main body and Clip) are held together with an M3 × 30 mm screw and nut, with a total assembled height of 32 mm.
These clips are designed for PETG(i recommend using it). I tested it with PETG-CF, and it worked well.
Recommended settings are 4–5 perimeters and 15–30% gyroid infill,I personally used 15%, which has been holding up great , you will need use supports (i used tree supports) .
For better consistency and less material shrinkage, I slightly increased the bridge speed, which helped keep the layer printing time more consistent and have less material shrinkage.
I Tested the both versions and it holder 10+ KG vertically (98N)
Assembly is straightforward and quick:
You will need a M3 × 30 mm screw and nut.
Boost Me (for free)
This took me lot of time , i do appreciate every boost ! Thankss!
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (1)