Filament clip for Bambu lab spool by Anders3D

Anders3D

3D Printer>3D Printer Parts

IP Report

Print Profile(4)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

Tight hole - 0.2mm layer, 2 walls, 15% infill

Designer

1 h

2 plates

4.9(372)

AMS 4 pcs by object in 4 color A1 mini

Designer

40 min

1 plate

5.0(12)

BIGGER HOLE - 0.2mm layer, 2 walls, 15% infill

Designer

59 min

2 plates

4.9(123)

EVEN BIGGER HOLE - 0.2mm layer, 2 walls, 15% infill

Designer

59 min

2 plates

5.0(8)

Open in Bambu Studio

Boost

1500

3306

830

440

4.4 k

3.4 k

Released

Description

Oh no! not one more filament clip for Bambu Lab spools.

Look at my new larger clip with color swatch

I have tried many filament clips but never found the perfect one, so I designed my own and tested and adjusted many times to get it to fit as well as I want.

In the end it turned out like this, a simple design with a really good fit, it sits tight but can still be moved easily.

I do not recommend using print profiles other than my own as I have not tested the others and cannot guarantee that they will work well. For example, they have too small hole.

UPDATE! I have update the original model now with a little bigger hole (2.12mm) since all filaments seem to be a little different thickness, so now it should work better I hope. If this is to small take the one with bigger hole (2,25mm).

NEW PROFILE ADDED!

New profile with bigger hole added for those who think the hole has been too small. The original should work with a hole of 2.12mm mm, but for some the hole has been too small so you can print the new one that I added with a hole of 2.25 mm.

About 1 g (1,2g) filament and is quick to print, copy as many as you need on the same plate or choose it for AMS and print 4 pieces in different colors on the same plate.

They work well for printing at faster speeds if you want.

Print more than one in Bambu Handy app

add mor clips to the plate like this in the app, and if you do it on computer, just copy and paste as many you want.

Grip for easy grip

Boost Me (for free)

Please boost me for free for more designs

Comment & Rating (830)

@user_280280632

Good evening, After printing the first profile for the P1S, the filament hole is too small. Measurements on the four parts I printed show 1.67mm, so the filament will not pass through. Did I miss a step?

The designer has replied

Show original

@gustens3d

Strange, the hole is 1.98 for me on A1

@user_280280632

Replying to @gustens3d :

Apparently I am not the only one with the first file I will try with the larger hole file Good evening

Show original

@gustens3d

Replying to @user_280280632 :

If you print using one of my profiles, the result should be excellent The two profiles with 4 and 3 uploaded by others have holes that are too small

Show original

@Bawaren

Boosted

Print Profile

Tight hole - 0.2mm layer, 2 walls, 15% infill

So simple, yet they bring me so much joy! I just print one each time I open up a new spool of filament for a matching clip. Prints fast at about a gram of filament. The tight hole design works perfectly for Bambu filament. So satisfying, and they work so all!

@gustens3d

Nice, I do the same, match the color on the clip, thanks for the boost 😊

@gustens3d

Have you seen that I've made a larger one https://makerworld.com/en/models/1137677-bambu-lab-spool-filament-clip-with-swatch#profileId-1139348

Show original

@Bawaren

Boosted

Replying to @gustens3d :

I did see that one! it looks great. For now, the smaller one works perfectly. Thanks!

@HouseOfBane

Boosted

Print Profile

Tight hole - 0.2mm layer, 2 walls, 15% infill

Printed off 10 clips and put them right to work. They fit perfectly onto the spool and the filament goes right through. Excellent and efficient design!!

@gustens3d

Tack så mycket, kul att du gillar dom 😊

@user_1713162852

Boosted

Print Profile

Tight hole - 0.2mm layer, 2 walls, 15% infill

Excellent! They fit perfectly and print wonderfully

Show original

@gustens3d

Perfect, Thanks for the boost 😊

@user_1713162852

Boosted

Replying to @gustens3d :

Your wellcome!

@ozskeeter

Print Profile

Tight hole - 0.2mm layer, 2 walls, 15% infill

yes, the hole is slightly small

@gustens3d

I've noticed that everyone seems to get differently sized holes, it works for me, but I've updated the profiles now with larger holes, so try again

Show original

@ozskeeter

Replying to @gustens3d :

I can verify that the "bigger hole" version is perfect. I suspect different filaments have slight different expansions while being printed, causing variability in the actual hole size printed.

@MPZDresden

Print Profile

Tight hole - 0.2mm layer, 2 walls, 15% infill

Perfekt.

@gustens3d

Nice 👍

@Magma_Doom

Print Profile

Tight hole - 0.2mm layer, 2 walls, 15% infill

I've tried several types of filament clips for my OEM Bambu spools, including those that clip onto the end and the last loop on the filament. I've come back to these, as they are the easiest to use and have rounded edges so there's less risk of them causing a leak in my filament vacuum bags. I did print the ones with the smallest holes and then use a precision drill bit to get the exact fit that I wanted. That's no fault of the model. It's just how 3d printing works. Still giving a full 5 stars!

@gustens3d

Thanks for that rating 😊

@bordi

Print Profile

EVEN BIGGER HOLE - 0.2mm layer, 2 walls, 15% infill

parfait

@gustens3d

👌

@ims7xp

Print Profile

Tight hole - 0.2mm layer, 2 walls, 15% infill

super helpful

@gustens3d

👍

@user_2283021405

Boosted

Print Profile

Tight hole - 0.2mm layer, 2 walls, 15% infill

Now I have to print a new one every time I change filaments, I really like it

Show original

@gustens3d

I do the same 😊 thanks for the boost

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Get Commercial License