Funko LACK Ikea shelf / Funko stand Ikea LACK

Summary

Funko Pop Figure Stand

• With this stand, you can attach your Funko Pop figures under the IKEA shelf (LACK Model) and have more storage space.

  - Be careful when printing and removing supports as you might break the circle of the 'O'
  
   

  Printing Details

• Printer: Artillery X4 Pro
• Material: PLA - PETG
• Layer Height: 0.2 with a 0.4 nozzle; you don't need higher quality
• Infill: 10% minimum to give the stand some strength, even if the figures are not very heavy.
• Infill Type: Linear or Monotonic preferred.

• Supports: YES, they are necessary for the piece with the letters; for the other, NO.
  
   

  IKEA shelf model

   

  Remix and Shared.

• Remixes are accepted for personal use. Attribution is appreciated when sharing remixes of the versions with the community.
  
  
  
   

TecXarT Details

TecXarT Website

English

Funko Pop Figure Stand

• With this stand, you can attach your Funko Pop figures to the bottom of an IKEA shelf (model LACK) and create more storage space.

Printing Details

• Printer: Artillery X4 Pro
• Material: PLA - PETG
• Layer Height: 0.2mm with a 0.4mm nozzle; you don't need higher quality.
• Infill: 10% minimum to give the stand some strength, even though the figures aren't very heavy.
• Infill Type: Linear or Monotonic preferred.
• Supports: YES, they are necessary for the piece with the letters, but NOT for the other one..

IKEA shelf model

Remix and Shared.

• Remixes for personal use are welcome. Attribution is appreciated when sharing remixes of these versions with the community.