Non-Ethanol Fuel Sign, customizable
Print Profile(1)
Description
This is a magnetic sign for a gas caddy or wherever you store your gas ( I have a metal gas caddy, so this magnetizes directly to it, but you could use other means depending on the use). I have added 6 places to insert magnets on the back (you will need 2.73mm by 12mm magnets). You can use smaller diameter magnets, but I would not use thinner magnets as it may affect functionality. The magnet holes are 3.1mm by 12.3mm for tolerances. AMS is not required.
4 wall loops
15% sparse infill density
Change grid infill to Gyroid.
.4 mm nozzle
.2mm layer height
Enable supports, tree auto, change threshold angle to 49 degrees, top distance .3mm, bottom distance .28mm. You will get clean supports that are easily removed. These are my go to support settings, if you have better supports after trying these, please let me know in the comments below.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)