Search models, users, collections, and posts
Swiss key holder
IP Report
Print Profile(4)
0.16mm layer, 2 walls, 15% infill
Designer
56 min
1 plate
0.2mm layer, 3 walls, 25% infill
38 min
1 plate
0.2mm layer, 2 walls, 15% infill
31 min
1 plate
0.2mm layer, 2 walls, 15% infill
33 min
1 plate
Open in Bambu Studio
Boost
954
2483
219
136
2.8 k
1.8 k
Released
Description
I liked the idea of swiss key holder, but could not find the one that would fit me, so made it myself. I designed it with only 2 bolts, as the 3rd middle would not allow for correct fit with my keys, but works just fine like this.
Print instructions
- Printed in PLA, but any material should do
- No supports needed
- 3MF and gcode are double color, variable layer height
- 20% infill
- 3 perimeters
Additional hardware needed
- 1x M3 locknut
- 1x M3 screw 10-20mm (depends on number of keys (M3x16 for 8 keys))
Boost Me (for free)
If you like this model, please leave a boost. Thank you
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (219)