FullControl - Nonplanar Spacer (for A1 Mini)

Note: This is designed only for the A1 Mini, if you have another printer follow this tutorial: 

---
Ever since I saw non planar 3D printing I have wanted to try it but I was only able to figure out how to make it work on my A1 Mini today.

I tried a few different models here on Makerworld but could not get any of them to work so I made my own file.

The steps to get this to work are as follows:

1. Download and open the zip file
2. Drag the gcode into Bambu Studio
3. Change from print to send on the green drop down:

4.On the device tab select storage
 

5. Press print!

Please note that the silicon heat sock may run into the model on the last 2 ridges! I tried modifying the model to stop this behavior but I have not been able to figure it out as of yet.

If you want to try other models from the full control website you can use my website to try them!

https://codepen.io/Boaztheostrich/full/JoKygVL

Just drag in the full control gcode and it will tell you how big of a cube shape to make in bambu studio.

Make that sized cube and then export it as gcode and drag that into my website.

It will than output a combine gcode that will let you easily print your full control file on your bambu printer!