Hands-Free Drink Bottle Holder–Belt Clip Hook

🧩 Design Overview

• 3-part design
  • Bottle hook
  • Buckle connector
  • Belt / pants mount
• Easy to assemble and easy to use
• Lightweight but strong when printed with proper settings

💡 Use Cases

• Walking, commuting, or travelling
• DIY work, gardening, or workshops
• Events where you don’t want to carry a bag
• Everyday hands-free hydration

🥤 Bottle Compatibility

✔ Works well with:

• 300ml bottles
• 600ml bottles
• Up to 1L bottles (maximum recommended size)
• Water, Coke, Pepsi, tea bottles, etc.

⚠️ Important notes:

• Larger bottles = more weight → may affect comfort and user experience
• Not suitable for large-neck bottles (e.g. Gatorade-style bottles)
• Bottle neck size is the limiting factor, not bottle height

🖨️ Printing Recommendations

• Material: PLA+, PETG, or ABS
  • PETG recommended for better strength and flexibility
• Infill: 20–40% (increase for heavier bottles)
• Layer Height: 0.2–0.28 mm
• Perimeters/Walls: 3–4 walls recommended
• Supports: Not required (depending on orientation)

For best results, print the belt mount with higher infill for strength.

📦 Assembly

• No tools required
• Parts snap together via the buckle design
• Easy to detach bottle when not in use

⚠️ Disclaimer

• This is a 3D printable model, not a physical product
• Strength depends on print material, settings, and printer calibration
• Test with lighter bottles first before using with heavier ones

Version Updates:

18/05/2026 - Added a profile with a brim to reduce the chance of failure for users with non-CoreXY printers. A1 / A1 mini