Hennessy folding door display box
Print Profile(4)
Bill of Materials
- Steel/Alu rods x 2: ø6mm - 350mm long
Description
Boost Me (for free)
Boosting this design is free for you, yet it makes a huge difference for me. Thanks for helping me keep creating!
Membership
Commercial License
If you find my designs interesting and useful, and would like to see more in the future, please consider giving me a boost and becoming a supporting member.
Also, if you need parts for any of my designs, please use the BOM link provided on the model page when buying. This gives me a small commission.
Hennessy Very Special Folding Door Display Box
Elevate your bar collection with the ultimate display piece for the world’s most famous cognac. Following the success of my previous folding door designs, I wanted to create something that felt truly "top shelf." This custom Hennessy Very Special Display Box combines a rugged, geometric low-poly exterior with a sophisticated mechanical reveal. Whether it’s a gift for a connoisseur or a centerpiece for your own collection, this print turns a standard bottle into a work of art.
Want it to look exactly like the photos? Use these filaments :
- Bambu Lab PLA matte Charcoal
Bambu Lab PLA silk + Gold
You can find them in BOM
Features
- LED Compatible: Includes an alternative base specifically for the LED Lamp Kit 001 to give your Cognac a golden glow.
- Cutout for LED in the lid : There is a cutout in the lid to fit the KC007 wireless LED
- Magnetic Snap: Optimized for 8x2mm magnets to provide a satisfying, secure "click" when closing the doors.
- Improved Mechanics: Based on the V2 architecture for easy assembly and high durability.
- Profiles: I have provided pre-configured profiles.
- Assembly guide : Follow the detailed assembly guide below.
Technical Specifications :
| Component | Quantity | Notes |
|---|---|---|
| Base | 1 | Standard or LED-compatible |
| Top | 1 | With cutout for LED |
| Knobs | 2 | |
| Pins | 2 | For parts 31 and 32 |
| Back Parts | 15 | |
| Door Parts | 30 |
Hardware Required
- Steel Rods: 2 pcs (ø6mm x 350mm long)
- Magnets: 30 pcs Round 8x2mm (Required for door closure)
- Adhesive: CA Glue (Superglue) for magnets and final assembly.
- Lighting: Optional LED Lamp Kit 001 and/or Kc007 LED
- Filament : I used Bambu's filament for this project. All the colors can be found in BOM.
You can find the steel rods you need here → (affiliate link)
If Bambu i out of stock, buy LED here → (affiliate link)
If Bambu's 8x2mm magnets are out of stock! You can find some here → (affiliate link)
Assembly Tips
- Alignment: Ensure your steel rods are clean and straight for the smoothest door rotation.
- Supports : Make sure all the supports are removed before assembly.
- Magnets : Be sure to orient the polarity of the magnets under assembly.
- Rod length : Before gluing the top on, double check that the rods aren't to long.
One's you have printed all the parts and acquired the accessories you need, just follow the assembly guide down below.
Start :
When you're done, it should look something like this.
Follow me if you want to see more of my designs in the future!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (52)