3D printer enclosure fully printed

Summary

modular version:
https://makerworld.com/en/models/228666

3D printer enclosure 600 x 700 x 760 mm
when printing ASA I get 30 °C in the enclosure at 20 °C room temperature

You need following screws/nuts
74 x nut m3 ISO 4032
47 x allen screw m3 x 6 ISO 4762
20 x allen screw m3 x 10 ISO 4762
2 x allen screw m3 x 12 ISO 4762
5 x allen screw m3 x 16 ISO 4762
2 x allen screw m4 x 25 ISO 4762

the panels are greenhouse polycarbonate panels you need two 980x2000x4.5 mm plates (you can cut them with a knife)

If you print everything you need approximately 1.5 Kg of PLA
For the hinges i recommend using ABS/ASA

Print Settings

Printer Brand: 

Creality

Printer:                     

Ender-3 S1 Pro

Rafts: 

No

Supports:                     

Yes

Resolution: 

0.2 mm

Infill:                     

20 %

Filament:

Polymaker Polylite PLA/ASA                 White/Black