Wolfbox MF200 AeroSpike Nozzle
Print Profile(2)
Description
Aerospike for the Wolfbox MF200
The narrow nozzles included with the blower don’t do much to properly concentrate the airflow. Instead, they restrict it, create significant turbulence, and sound like they put extra strain on the motor—likely reducing battery life. On the highest power setting, the turbulence becomes so severe that the airflow is barely directional and loses strength within about a metre of the nozzle.
This Aerospike version, seems to place far less strain on the motor while delivering an impressively focused stream of air that carries much farther than the stock narrow nozzles. And honestly—it looks way cooler too.
I printed mine using a 0.2 mm nozzle with standard supports on the bed only, which were easy to remove. It should work perfectly well with a 0.4 mm nozzle too. If you’re after an especially smooth finish, just reduce your layer height.
Enjoy!
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (76)