Airbus Ultimate Throttle Mod for Honeycomb Bravo

This is my 3rd attempt at making an Airbus throttle set for the Honeycomb Bravo. While I am fairly happy with the previous versions there is always room for improvement. I have been inspired by a commercial product from Australia that honestly looks a lot better but cost over £100 (and its 3d printed) I was also inspired by some of the Boeing 737 mods I've seen on other 3d print file sites.

So I grabbed a pair of calipers, spent a lot of time learning new CAD programs and have a compromised set which works really well for me in VR. Printed in PLA on a single plate on my A1, all the items can be moved around and can be printed on multiple plates using an A1mini

The labels on the detents we printed on a brother label printer, I would have prefered to so it with the AMS but think it will waste too much material, but I will have a play and may upload an add on.

The additional parts you will need are 3 ball point pen springs,
1 for the Flaps Mod

2 for the springs in the detents. ( Push the balls in from the back, add the spring and its a push fit into the Honeycomb throttle lever. You will find a small recessed rectangle where the mod fits perfectly)
 (suggest you buy pens from the supermarket, cheaper than buying just springs on Amazon) 

You also need 2 ball barrings, I found these on Amazon (come in packs of 25, so now I have 23 left over :-) https://www.amazon.co.uk/sourcing-map-Precision-Machinery-Automotive/dp/B0FBGLXXYL

Everything should be easy enough to fit once printed.