Portable Eye Wash Bottle Adapter –Threaded (Remix)

All Compatible Lightbox Frames & Mounts Available Here!
 

🛠️ Recommended Gear

Check out my Amazon Storefront by clicking here!

Bed Adhesion (Fix First Layer Issues)         Magnets (for optional mounts)

Recommended LED Light Strips     Battery Powered LED Light Strips     Double Sided Tape for Lens: Optional

Custom One-Off Designs Available - CLICK HERE

Printing tips are located at the bottom of this listing

___________________________________________________________________________

This is a remix of the original Eye Washing Station by ivity_creations, redesigned to improve printability, portability, and real-world usability in workshops and job-site environments.

🔧 Remix Improvements

• Integrated threads for standard U.S. 16 oz water bottles
• Eye pieces grafted directly into the body, allowing the model to print as one solid part
• Prints cleanly with no supports
• Optional color change at the eye-cup transition for visibility and orientation
• Compact and lightweight for quick emergency access

Simply thread the adapter onto a bottle and it’s ready for use.

⚠️ Important Safety Notice

For safety reasons:

• It is highly recommended to dip-coat this print in a food-safe sealant, applying multiple coats
• Use only distilled water or an OTC eye-flushing solution
• Sterilize between users with 99% isopropyl alcohol
• This device should be used only in emergency situations when immediate eye irrigation is required

This is not a medical device and is intended solely as a temporary emergency solution.

While no printed solution is perfect, this design provides a portable alternative when a permanent eye-wash station is unavailable.

📦 Print & Use Notes

• Approximate filament usage: ~75 g
• Strong, lightweight, and easy to store
• Ideal for workshops, garages, toolboxes, backpacks, and job sites

🙏 Credit

Original design by: ivity_creations
This upload is a remix, and full credit goes to the original designer for the foundational concept.

_________________________________________________________________________________________________

Thanks for downloading from Chopper Originals.

If this print earned a spot on your printer and you’re out of Boosts, consider buying me a coffee ☕ to help support future designs and releases.

___________________________________________________________________________________

Affiliate Disclosure
Some links in this listing are affiliate links. As an Amazon Associate, I earn from qualifying purchases at no extra cost to you.

____________________________________________________________________________________

Having issues getting that first layer to flow and stick good? Follow these steps, it helps! ***If using an enclosed printer, be sure to remove the lid and leave door open to avoid heat creep***

If using multiple brands/types of filament, you will need to save each as a Custom Filament setting. Otherwise the settings will change when your colors switch.