Holder Wall- & Pipe Mounting Clip for 20mm PE Pipe

This set consists of a modular holder for 20 mm PE water pipes, specially designed for use in stables, workshops, or outdoors.
The pipe can be easily clipped in and holds securely in the holder without additional fastening.
Optionally, the pipe can be additionally secured with separate clamping pieces – ideal for vibrations or higher mechanical stress.

Features

• Suitable for 20 mm PE water pipe
• Pipe is clipped in, additional securing optional
• Clamping pieces for firm pipe fixation (not strictly necessary)
• Robust, practical design
• Designed for PETG printing (moisture and temperature resistant)

Variants in the Set

• Wall holder
• Pipe holder for 60 mm pipe (e.g. standard pipe in the stable)

Required Screws & Fastening Material

For the clamping pieces:

• 1 × M6 × 45 mm screw (fastening the clamping pieces to the clamp)
• 2 × M6 × 25 mm screws (for the clamping piece itself)

For pipe mounting (60 mm pipe):

• 1 × M10 threaded U-bolt 60 mm

(Screws and fastening material are not part of the print model)

Print Recommendations

• Material: PETG
• Nozzle: 0.6 mm

• Layer height: 0.24 mm

   

The model was designed precisely for these settings and thus offers high stability and good printability.

Assembly Instructions

• The pipe can be clipped in without tools
• Mount clamping pieces only if needed
• Use appropriate dowels and screws for wall mounting depending on the substrate
• Ideal for permanent use in stables or outdoors

Applications

• Stable & Agriculture
• Water pipes for drinking troughs
• Workshop & Garage
• Temporary or permanent pipe routing