Nozzle Cleaner (Uses A1 Wiper)
Print Profile(1)
Bill of Materials
Description
Nozzle Cleaning Brush – Bambu Lab Printers
This nozzle cleaning brush is designed for quick and safe cleaning of Bambu Lab printer nozzles. It helps remove filament buildup from the exterior of the nozzle to maintain consistent extrusion and improve print quality.
How to Use
- Heat the nozzle to 160–200°C (warm, not cold).
- With filament unloaded or retracted, gently brush the outside of the nozzle to remove residue. Sometimes it helps to remove the sock to get a thorough cleaning.
- Use light pressure and avoid contact with moving parts.
- For external cleaning only
A1 Nozzle Wiper Installation
- The slot labeled “A1” is designed to accept the Bambu Lab A1 nozzle wiper.
- Place ends in first so that the wiper is slightly bowed in the middle.
- Press the wiper firmly into the A1 location until fully seated.
- The fit is intentionally snug to prevent movement during use.
Notes
- Printed in ABS but works well will other materials.
- 3 holes in the back allow attaching to metal surfaces with magnets
- Hole is designed to allow hanging on an HSW board. I used a hanger similar to this one. LINK
PARTS
Boost Me (for free)
I design practical, well-tested models and share them to help the community. Boosts help support continued development, testing, and future improvements.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)