Urban swag bear - Free 3D Print Model

Search models, users, collections, and posts

3Dcrabi

Toys & Games>Characters

IP Report

Print Profile(2)

All

A1 mini

H2D

H2S

H2C

X1E

P2S

X1 Carbon

P1S

H2D Pro

P1P

X2D

A2L

150% size - cca 14cm high, 0.2mm layer, 2 walls, 15% infill

Designer

5.1 h

5 plates

5.0(9)

0.12mm layer, 2 walls, 15% infill

Designer

4.3 h

5 plates

3.4(7)

Open in Bambu Studio

Boost

263

590

163

Released

Description

Hi, I created a cool teddy bear in a hoodie as a kit, you can print the individual parts without AMS, they fit together beautifully, some parts need to be glued together. I wish you a lot of fun and may the model bring you joy. Enjoy

Boost Me (for free)

If you would like to support my work, boost me. Thank you

Comment & Rating (27)

@Dkaz42

Boosted

Print Profile

0.12mm layer, 2 walls, 15% infill

I upscalled it to 300% . get the hat to print good and fit properly was trial and error . but eventually I got it close enough and just went with it .

(Edited)

@Half_Wing_Angel

did upscaling it help the hat print better? I wonder if changing the orientation of the hat to on its side would make it print the bottom easier without messing up the side too much.

@Dkaz42

Boosted

Replying to @Half_Wing_Angel :

I tried a few things , I changed supports to normal , and removed them from the ear and front opening . but the underneath was not fun . ultimately I had to just cut and mar it look the best I could . if it was just a flat bottom that would make it so much easier .

@2ndstoryprinter

Print Profile

150% size - cca 14cm high, 0.2mm layer, 2 walls, 15% infill

Profile printed without issue ! Very nice.

@Xilow

Print Profile

0.12mm layer, 2 walls, 15% infill

Worst animal figure that I’ve done from this designer!!! The small parts were easy to glue on but the big parts were really hard to glue on and took a long time to stick. I used 3d printer super glue so it’s not the glue. The glasses break easy.

@teammatthias

I printed mine at 125% and everything printed great; no pieces broke….everything fit well. Maybe reprint a piece or two?

@Elf_3039212094

Print Profile

150% size - cca 14cm high, 0.2mm layer, 2 walls, 15% infill

Nice! I printed both sizes... Very nice print!

The profile uploader has replied

@3dcrabi

Perfect 😍😜👌👌👌

@teammatthias

Another cutie pie here 💖 Extremely good profile and print. Love this bear! Thank you!

@seblemaire

Print Profile

150% size - cca 14cm high, 0.2mm layer, 2 walls, 15% infill

superb

@hilbert2026

Print Profile

0.12mm layer, 2 walls, 15% infill

(Edited)

Other Issues:I wish it would have fit together better and the hat was difficult to make fit right. Cool idea though.

@npy410

Print Profile

150% size - cca 14cm high, 0.2mm layer, 2 walls, 15% infill

@user_213902290

can i print this in pla

The designer has replied

@3dcrabi

hi, yes u can

@user_213902290

Replying to @3dcrabi :

ok thank you😁

@Dkaz42

Boosted

I cant get the hat to print, Once it starts to print the supports its shredding everywhere

The designer has replied

@3dcrabi

use 3dlac spray on bed, dry filament

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Bear Trap

printchallenge

13.1 k

8.6 k

CITY FLOW - (ZKULL Collection Urban) - no ams

Slevin

6.2 k

3.4 k

Bear keychain

HG_Design

8.1 k

2.8 k

Rose Bear

Kocyns

32.6 k

8.7 k