NZXT H210 Magnetic front panel

NZXT cases have a unique and clean look. But most of them, including the H210, have bad airflow with the stock front panel.

This model solves this issue and will make your PC breathe a ton of fresh air !

It fit perfectly on the case just like the original one.

Things needed

• 4 10x2 round magnets
• 2 M3 Hex socket bolts
• 2 M3 square nuts
• Glue (can be any type from super glue to hot glue)

Print

None of the pieces require supports, I recommend printing them in at least 0.16mm layer height for the parts to fit nicely.

To put custom text like I did on mine, you can do it directly in Bambu Studio on the right bottom part.

Assembly

For V1 : Simply insert the connectors in one of the two panels and assemble it with the other one, then you can glue everything together. (optional)

Note : don't use black hot glue like I did on my first try if you print this model in white.

For V2 : Screw both parts together with 2 M3 Hex socket bolts.

Then glue the magnets on the four standoffs.

Finally, remove the old panel and replace it with this one, don't forget to post a make and to tell me if you encounter any problems !