Dragun15

cover

plate_1.png

2026-01-14_9cbdd6d4200218.webp

<h2>Printer Profile Description (Supports Required)</h2>This printer profile is tuned for the mStand Inspired Phone Stand and focuses on strong layer bonding and clean surfaces. Supports are required to properly print the inner overhang/ledge area (depending on your orientation and slicer), ensuring the phone-rest and curved sections come out crisp and reliable.The model prints best with moderate infill and extra perimeters for stability. PLA and PETG are both suitable.<h3>Recommended Print Settings</h3><ul><li>Material: PLA or PETG</li><li>Layer height: 0.20 mm (0.16 mm for a cleaner finish)</li><li>Walls / Perimeters: 3–4</li><li>Top / Bottom layers: 4–5</li><li>Infill: 15–25% (Gyroid or Grid)</li><li>Supports: ON (required)<ul><li>Placement: Touching build plate (preferred for easier cleanup)</li><li>Style: Tree supports (if available) for less scarring</li><li>Overhang angle: ~50–55°</li><li>Support density: 10–15%</li><li>Support interface: ON (for cleaner underside)</li><li>Z-distance (support gap):<ul><li>PLA: ~0.20 mm</li><li>PETG: ~0.24–0.30 mm (helps avoid fusing)</li></ul></li></ul></li><li>Brim: Optional (recommended for PETG)</li><li>Print orientation: Flat base on the build plate (as uploaded), unless you have a proven alternative</li></ul>

0.2mm layer, 3 walls, 15% infill

<h2>mStand Inspired Phone Stand</h2>The mStand Inspired Phone Stand is a clean, minimalist smartphone holder designed for everyday use. Inspired by the iconic mStand shape, it combines a smooth curved form with solid stability, making it perfect for desks, nightstands, or workspaces.Your phone rests at a comfortable viewing angle, ideal for watching videos, video calls, browsing, or charging. The open back design allows easy cable routing, so you can charge your device while it’s on the stand.This stand works well with most smartphones, including devices with thicker cases. Its simple one-piece design makes it easy to print and durable for long-term use.<h3>Print Information</h3><ul><li>Estimated print time: ~6 hours</li><li>Material: PLA or PETG</li><li>Supports: Not required</li><li>Infill: 15–20% recommended</li></ul>

Print Profile(1)

Description

mStand Inspired Phone Stand

Print Information

Comment & Rating (0)

License

Related Models

mStand inspired Phone stand