Glider kit card (flies great)
Print Profile(4)
Description
This is a kit card of a glider. It glides very well if weighted properly. I made this because I saw many kit card airplanes that did not fly and wanted to make one. It must be printed with a 0.05 mm layer height. If the glider nose dives then print out the light weight securer. If the airplane flips backward print out the heavy weight securer. (also make sure that the wings are slanted back to provide lift. If they are slanted forward then the fuselage sides need to swap)
Some recommendations for this print are.
- Clean your print bed before printing.
- Print with around 5% infill.
- Do not print to fast. (stay near 200 m/s or less)
You can find my new glider design here: https://makerworld.com/en/models/895584#profileId-853437
Documentation (5)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (315)