P250 Asiimov (Blowback Rubber Band Gun) - Free 3D Print Model

Search models, users, collections, and posts

THE MOC CHANNEL

Props & Cosplays>Cosplay Weapons

IP Report

GIF

Print Profile(2)

All

A1 mini

P1S

X2D

H2D Pro

H2S

X1 Carbon

H2C

X1E

P1P

H2D

P2S

A2L

P250 Asiimov (All Printers)

Designer

10.6 h

17 plates

4.9(50)

Cover for shooting mechanism

21 min

1 plate

5.0(1)

Open in Bambu Studio

Boost

1258

2932

139

1.8 k

586

Released

Bill of Materials

Maker's Supply Kits and Parts

Select all

M2x10 BHCS Machine Screw (20PCS) - AA164

M2 Button Head Cap Machine Screws (BHCS)

Round Magnet

Compression Spring

Rubber Bands

Bambu Filaments

Select all

PLA Basic

PLA Basic

PLA Basic

Description

Membership

Like my models? Subscribe to obtain a commercial license to sell physical prints of my model!

Join

Boost Me (for free)

Every boost is appreciated and helps support my work here!

This is a 3D-printed rubber band gun replica for display or responsible hobby use only. Do not aim at people or animals, do not modify it, and do not use in public spaces. Adult supervision required for minors. Use responsibly and in accordance with local laws.

Warning! This model is quite complex to assemble and requires non 3D printed components.

About This Model:

A 1:1 replica of the P250 Asiimov from CS2/CS:GO.

This model features:

100% Awesome skin straight from CS2/CS:GO.
4 round rubber band capacity.
Semi auto blowback action
Rubber band storage in removable magazine.

How To Use The Files:

The print files are provided in 3MF and STL format. Refer to the 3MF print profile for my recommended print settings for Bambu Lab printers. Use the STL files if you are comfortable with dialing in your own settings and want maximum control.

PDF building instructions are available and can be downloaded from the files section.

Additional Hardware:

Alongside the printed parts, you will also need some non-printed components. I have linked the ones I used above, which can be purchased from Maker's Supply by Bambu Lab. You will also need to use superglue for some of the parts.

Follow & Support Me!

THE MOC CHANNEL:

Good Luck Printing!

Documentation (1)

Assembly Guide (1)

P250 Asiimov building instructions.pdf

Comment & Rating (139)

@PocketArmourCO

Boosted

Print Profile

P250 Asiimov (All Printers)

I printed because I thought it would be cool to have a matching sidearm for my awp, overall an amazing model, very high design quality and functionality, I had trouble with keeping it from shooting multiple rubber bands but using your thumb to prevent that works perfectly fine. thank you for the model 👍

(Edited)

@someone0.2

this is cool! nice!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

(Edited)

@user_484842761

Hello so I want to make this but don’t really now how I have never made something like this before and by have all good reviews and your gun just looks so cool so I was wondering if u could help me make it

The designer has replied

@THE_MOC_CHANNEL

Hello, may I ask how you would like me to help you? Feel free to message me directly with your queries.

@user_484842761

well so do I need those exact pieces from the kit

@user_484842761

I decided I am going to make your Breta gun that also shoots rubber bands

@user_2542801890

Boosted

hello designer, this model looks beautiful and am so excited to print it. I have 3 5.2 magnets but for the screws and the spring, is a pen spring ok or is a different one necessary for the model. for the screws I have M2x10 FHCS machine screw is that fine the one listed for the model is M2x10 BHCS

The designer has replied

@user_2542801890

Boosted

pls I'm begging u to respond this model is literally my dream

@THE_MOC_CHANNEL

Hi there. The M2x10 FHCS screws should be fine. However, take care to not screw them in too tight since the angled edge can split the printed parts. For the spring, You will need one with a diameter of 8mm to fit into the model. A typical pen spring will be too thin to work.

@user_2542801890

Boosted

tysm

@user_3053900033

All your models are beautiful, but I think there should be a version with just the outer part for wall decoration, without many assembly pieces like the ones that shoot elastic bands, internal parts, etc. I would really like versions of them just for hanging on the wall.

@user_193646115

Print Profile

P250 Asiimov (All Printers)

This is a very good design. If all the rubber bands are fired at once, you might want to reduce the number of rubber bands. It worked well for me. I changed orange to blue. Bambu PLA Matte White Bambu PLA Matte Black Bambu PLA Glow Glow Blue

(Edited)

Show original

@AK_PrintFactory

Boosted

Print Profile

P250 Asiimov (All Printers)

A great model. Works perfectly too ☺️👍🏻

The profile uploader has replied

Show original

@THE_MOC_CHANNEL

Looks great! Thanks for making it.

@sesalnik

Fantastic model. Tolerances were perfect everywhere, everythig fit together how it should, orientations in the slicer are perfect. The size is perfect, fits in the hand very well. Thank you so much for making this available. I learned a lot about design for 3d printing by just assembling it. The pins being a snug fit on the other pannels and a loose fit on the inner black part is such a nice detail. Often when i design stuff, i usually have to do some post processing, sanding or drilling, but here everything just fit together.

The designer has replied

@THE_MOC_CHANNEL

Thanks for the in depth feedback! Glad you enjoyed my design!

@Probie

Boosted

Print Profile

P250 Asiimov (All Printers)

Awesome model!

The profile uploader has replied

@THE_MOC_CHANNEL

Looks great! Thanks for making it!

@hardyi

really nice, thank you!

The designer has replied

@THE_MOC_CHANNEL

Looks great! Thanks for making it

@lecso

Print Profile

P250 Asiimov (All Printers)

Overall great model, personally had some issues with glueing and with the small parts, but was fun to do it

The profile uploader has replied

@THE_MOC_CHANNEL

Looks great! Thanks for making it

(Edited)

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.