New_Kids_Turbo

spudbaron

Caz Ordo

we all clicked this for the dog in the photo

Frank

High adhesion 0.2mm layer, 2 walls, 15% infill

NutellaNinja500

Fast print  0.28mm layer, 2 walls, 5% infill

Modello perfetto, si stampa molto facilmente, incastri perfetti veramente bello e stampato in PLA.

Perfect model, prints very easily, perfect fits, truly beautiful and printed in PLA

Fabio

w this looks and feels like a real gun def on the printing list


BOFOGT

Standard print 0.2mm layer, 2 walls, 15% infill

Printed smooth and snapped together nicely. Quite solid.  

CloudEscolar

Nik Hemmeryckx

works but you have to pull the trigger a couple times between each shot

Evan

user_2170303808

cover

1.jpg

2.jpg

20250311_163412.jpg

2025-03-08_859a85aff4aef.gif

plate_1.png

This is a high adhesion profile: the speed of building walls and the first layer has been slowed down to avoid print quality or tolerance issues.  The wall generator has been set to Arachne for super adhesion

plate_2.png

2 plate, this is a high adhesion profile: the speed of building walls and the first layer has been slowed down to avoid print quality or tolerance issues.  The wall generator has been set to Arachne for super adhesion

2 plates 0.2mm layer, 2 walls, 15% infill

This is a fast high adhesion profile: the first layer was slowed down to avoid print quality or tolerance issues. The wall generator was set to Arachne for super adhesion.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you enjoy my models and would like to show your support, please consider donating a boost! Your contribution would mean a lot to me. 😊</boostcontent></boostme>A new Colt Rubber Band Gun (Print-in-Place) You can find it at the following link: <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/models/1239975-colt-rubber-band-gun#profileId-1260246">https://makerworld.com/en/models/1239975-colt-rubber-band-gun#profileId-1260246</a>  <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/models/1239975-colt-rubber-band-gun#profileId-1260247"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000001187781/design/2025-03-24_84a4c02b7ac99.png"></a> The Rubber Band Gun is a simple yet impressive project for a pistol that shoots rubber bands. The model is designed to require only basic assembly after printing – just put the housing together and place the internal mechanism components.📌 Assembly Instructions: ✅ Print all parts – preferably using PLA or PETG. ✅ Assemble the housing – the components snap together easily. ✅ Lubricate the mechanism – for smooth operation, apply a small amount of technical oil inside. ✅ Load the rubber bands – stretch them over the front of the barrel and hook them onto the trigger mechanism.🎯 Ready to fire! Enjoy your 3D-printed Rubber Band Gun! 🚀

Print Profile(4)

Description

Comment & Rating (62)

License

Related Models

AWP Asiimov Sniper Rifle (Rubber Band Gun)

Pocket Rubber Band Racer

21-Shot Rubber Band Shooter

Rubber Band Gun V2 (Print-In-Place)