2024–2025 Tacoma MagSafe Phone Charger Pad 4th Gen

All Compatible Lightbox Frames & Mounts Available Here!
 

🛠️ Recommended Gear

Check out my Amazon Storefront by clicking here!

Bed Adhesion (Fix First Layer Issues)         Magnets (for optional mounts)

Recommended LED Light Strips     Battery Powered LED Light Strips     Double Sided Tape for Lens: Optional

Custom One-Off Designs Available - CLICK HERE

Printing tips are located at the bottom of this listing

___________________________________________________________________________

This MagSafe charger pad for the 4th Gen Toyota Tacoma (2024–2025) is a modified version of the original design by vidision on Printables, updated to accept a much more affordable and widely available aftermarket MagSafe charger.

UPDATE: 4-6-2026, Added TRD Logo version.

The pad matches the shape and footprint of the OEM phone cubby, providing a clean, factory-style look while securely holding your phone in place for wireless charging during daily driving or off-road use.

Instead of requiring a higher-cost OEM charger, this version is designed to fit the following aftermarket 15W MagSafe charger:

👉 https://amzn.to/4sTPlbk

Features

• Designed specifically for 4th Gen Toyota Tacoma (2024–2025)
• OEM-style fit that matches the factory phone cubby
• Modified to accept a cheap and easy-to-source aftermarket MagSafe charger
• Clean cable routing on the rear
• No permanent vehicle modifications required
• Compatible with most MagSafe-equipped iPhones

Installation Instructions

1. Print using your preferred material (ABS recommended for vehicle interiors).
2. Place the 15W MagSafe charger into the front recess.
3. Press the USB-C cable into the rear cable channels, carefully following the bends.
4. Apply 1–3 pieces of tape into the rear recesses (3M VHB recommended).
5. Remove tape backing and triple-check alignment before pressing firmly into place.
6. Plug the USB-C cable into an available port.

Notes

• This is a remix / modification of the original design by vidision, adapted specifically for an aftermarket charger.
• Fitment is confirmed for 2024–2025 Tacoma (4th Gen) only.

If you’re looking for a clean, factory-looking MagSafe solution without paying OEM prices, this is it.

_________________________________________________________________________________________________

Thanks for downloading from Chopper Originals.

If this print earned a spot on your printer and you’re out of Boosts, consider buying me a coffee ☕ to help support future designs and releases.

___________________________________________________________________________________

Affiliate Disclosure
Some links in this listing are affiliate links. As an Amazon Associate, I earn from qualifying purchases at no extra cost to you.

____________________________________________________________________________________

Having issues getting that first layer to flow and stick good? Follow these steps, it helps! ***If using an enclosed printer, be sure to remove the lid and leave door open to avoid heat creep***

If using multiple brands/types of filament, you will need to save each as a Custom Filament setting. Otherwise the settings will change when your colors switch.