MTG Lorwyn Custom Art 2/2 Elf Token

Custom Art 2/2 Elf Token for Magic: the Gathering

As you get ready for the Lorwyn Eclipsed prerelease, or build your High Perfect Morcant commander deck, print some custom elf tokens! I have designed one of every token in the upcoming Lorwyn Eclipsed set plus a few of the tokens for the Lorwyn Eclipsed Commander set. You can find them all here.

• Sturdy: All of my tokens are 1.5mm thick, ensuring they last and are harder to lose.
• Standard Size: All of my tokens have the same height and width as a standard Magic: The Gathering Card, so they will fit in your deck boxes.
• Customizable: The image is embedded into the token, so it's easy to change the colors on each segment of the print.

This was printed with the 0.2mm nozzle to capture the finer details. You can print this with the 0.4mm nozzle, but you'll need to take some extra steps to get there. Note that printing with 0.4mm nozzle is tricky and might take a few tries to work.

• Make sure your plate is very clean. 
• Set the initial layer width to .21mm. 
• Reduce initial layer speed to 20mm/s and initial layer infil speed to 50mm/s
• Make sure the print bed is 65C. The default temperature won't work. Equally important that you let the build plate cool completely before removing, the increased bed temp means that if you try to pull it before it's cool, the print will bend and warp.

Regardless of what nozzle you use, make sure the slice gap closing radius is set to .001.